Operating instructions

R Activating the mode restriction

1 MMenuN A MBNM1NM5NM4N A MSetN

2 Enter the administrator code. A MSetN

3 Press M1N to select “On”.

R Press M0N to select “Off”.

4 MSetN A MMenuN

R Mode restriction for departments

Setting mode restriction for departments

1 {Menu}

2 Press {V} or {^} repeatedly to select “Department Setup”.

3 Press {F} or {E} repeatedly to select “New Addition”. A {Set}

4 Enter the administrator code. A {Set}

5 Enter the name, up to 16 characters. A {Set} A {V}

6 Enter a 4-digit department code using 0-9 A {Set}

7 If necessary, change the “Print”, “Copy”, or “Color”

setting. Press {V} or {^}, press {F} or {E} repeatedly

to select the desired setting. A {;}

8 {Menu}

*1 DP-MC210 only

Editing mode restriction for departments

1 {Menu}

2 Press {V} or {^} repeatedly to select “Department Setup”.

3 Press {F} or {E} repeatedly to select “Edit”. A {Set}

4 Enter the administrator code. A {Set}

5 Press {V}, {^}, {F} or {E} repeatedly to select the desired item. A {Set}

6 Edit the name if necessary. A {Set} A {V}

7 Edit the department code if necessary. A {Set} A {V}

8 Edit the department settings if necessary. Press {V} or {^}, press {F} or {E} repeatedly to select the desired

setting. A {;} A {Menu}

Erasing a stored item

1 {Menu}

2 Press {V} or {^} repeatedly to select “Department Setup”.

3 Press {F} or {E} repeatedly to select “Edit”. A {Set}

L To erase all items, press {F} or {E} repeatedly to select “Erase All”. A {Set} A Enter the administrator

code. A {Set} A MStartN (DP-MB350)/MBlackN (DP-MC210)

4 Enter the administrator code. A {Set}

5 Press {V}, {^}, {F} or {E} repeatedly to select the desired item. A {#}

L To cancel erasing, press {Stop}, then press {Menu}.

6 {Set} A {Menu}

Resetting the counter for departments

1 {Menu}

2 Press {V} or {^} repeatedly to select “Department Setup”.

3 Press {F} or {E} repeatedly to select “Reset Counter”. A {Set}

4 Enter the administrator code. A {Set}

5 MStartN (DP-MB350)/MBlackN (DP-MC210)

L To cancel resetting, press {Stop}, then press {Menu}.