Operating instructions

6
To use Easy Print Utility on your computer, the following are required:
– Windows 2000 Service Pack 4 and Security update for Windows 2000 (KB835732).
Install KB835732 from Microsoft download site before installing Easy Print Utility.
– Windows XP Service Pack 2 or later.
2.3.2 PCL driver
Operating System:
Windows 2000/Windows XP/Windows Vista/Windows 7
2.4 LAN features
2.4.1 WINS Server
3. Other additions
3.1 Mode restriction
You can restrict color
*1
/monochrome output by enabling the department code.
Only users who know the department code can
– make a copy in color
*1
/monochrome
– print a document in color
*1
/monochrome
– print a file from an SD card
*1
in color/monochrome
– print a file from an FTP server
*1
in color/monochrome
*1 DP-MC210 only
Note:
R You can set department codes and restriction settings for individual departments (up to 10 departments).
<Settings>
R Administrator code
To use the mode restriction feature, please do not allow many people to know the administrator code.
I want to use the PCL driver R Install the PCL driver as follows:
1. Start Windows, then insert the supplied CD-ROM into your CD-ROM drive.
2. [Modify] A [Add PCL Printer Driver] . Follow the on-screen instructions.
Setting the primary WINS
server for the LAN
connection
MBNM5NM3NM8N
This feature is available when feature #500 is deactivated.
1. MMenuN A MBNM5NM3NM8N A MSetN
2. Enter the primary WINS server of the network on the LAN using the dial
keypad. A MSetN A MMenuN
Setting the secondary WINS
server for the LAN
connection
MBNM5NM3NM9N
This feature is available when feature #500 is deactivated.
1. MMenuN A MBNM5NM3NM9N A MSetN
2. Enter the secondary WINS server of the network on the LAN using the dial
keypad. A MSetN A MMenuN
Changing the administrator
code for mode restriction
settings
MBNM1NM5NM1N
1. MMenuN A MBNM1NM5NM1N A MSetN
2. Enter the current administrator code. A MSetN
R The default administrator code is “0000”.
3. Enter a new 4-digit administrator code using 0-9. A MSetN
4. Enter the new administrator code again. A MSetN A MMenuN
Note:
R It is recommended that you change this administrator code from the default
administrator code.
R If you forgot the current administrator code, enter “0101” instead.