Operating instructions

2
When using the automatic document feeder:
MStartN (DP-MB350)/MBlackN or MColorN (DP-MC210)
R The scanned image will be automatically saved in the selected folder on the network.
7 After you finish scanning, press MStopN to reset the settings you set in step 5.
Note:
R You can save the images in TIFF, JPEG or PDF formats.
R If this function does not perform properly, consult your network administrator. This unit’s SMB function does not
support NTMLv2 and SMB signatures.
<Change Functions>
<Reference list>
You can print out the SMB folder list for your reference.
1 {Menu}
2 Press MCN or MD N repeatedly to select Print Report.
3 Press {FN or ME} repeatedly to select SMB Folder List.
4 Press {Set} to start printing. A {Menu}
<Specifications>
Scan to SMB folder memory capacity: 5 MB in total
2.1.2 Holding the previous scan setting temporarily (Push scan)
The previous scan setting will be kept for about 1 minute after scanning. To reset the scan setting, press {Stop}.
2.2 Fax features
2.2.1 Quick scan
Erasing all email addresses,
FTP destinations, and SMB
folder destinations stored in
the unit
MBNM5NM7NM8N
M0N No (default)
M1N Yes
R Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
To erase all email addresses:
1. MMenuN A MBNM5NM7NM8N
2. Press M1N to select Yes. A MSetN
3. Press M1N to select Yes. A MSetN A MMenuN
To erase FTP destinations:
1. MMenuN A MBNM5NM 7NM8N
2. Press M1N to select Yes. A MSetN
3. Press M0N to select No. A MSetN
4. Press M1N to select Yes. A MSetN A MMenuN
To erase SMB folder destinations:
1. MMenuN A MBNM5NM7NM8N
2. Press M1N to select Yes. A MSetN
3. Press M0N to select No. A MSetN
4. Press M0N to select No. A MSetN
5. Press M1N to select Yes. A MSetN A MMenuN
Setting the quick scan mode
MBNM4NM1NM9N
M0N Off (default): Deactivates this feature.
M1N Always: The unit will scan the document and store it into memory first,
then the unit will start sending the documents. You can send faxes without
activating quick scan.