Operating Instructions

Chapter 2 More Menus Features
95
4 Select “Insertion / Overlay”, and then
select “Overlay”.
5 Select colours for the overlay original
from the basic colours or registered
custom colours, and then select “OK”.
 When selecting from the basic colours
 When selecting from the registered
custom colours
z If “Add Custom” is selected, the Add
Custom screen is displayed, and colours
can be registered. Refer to New Colour
Registration (see page 19).
6 Adjust the overlay density with
“Lighter”, and “Darker”, and then
select “OK”.
7 Select the overlay position, and then
select “OK”.
8 Enter the desired number of copies.
9 Press the Start key.
z When copying from the Platen Glass, place
the next original, and follow the instructions
described on the Touch Panel Display.
z When the overlay copying is completed, the
overlay original registration confirmation
screen is displayed.
21
12
12
Lighter Overlay density level is
decreased.
Darker Overlay density level is
increased.
Overlay on
Top
Copied with the scanned original
overlaid on the overlay original.
Overlay on
Bottom
Copied with the overlay original
overlaid on the scanned original.
12
12