Operating Instructions

Chapter 1 Basic Menu Features
27
4 Select “More Settings”.
5 Select an Image Quality type, and
then select “OK”.
z If “TracingPaper” is selected in “Original
Type”, the Bleed-Through Prevention is set
to 3 regardless of the selected image quality
type.
z The default values are set upon shipment.
Key operations can change these values.
Refer to Copier Settings in the Operating
Instructions (For Function Parameters) of
provided CD-ROM.
6 Select “OK”.
7 Enter the desired number of copies.
8 Press the Start key.
Confirm the image quality of the copied
papers.
z After finishing copying, press the Reset key to
return to the initial screen of the current active
mode.
Default Copies with the default image
quality set by the function
parameters.
Vivid Copies with vivid image quality.
Bright Copies with bright image quality.
Warmer Copies with reddish colour
accentuated.
Cooler Copies with bluish colour
accentuated.
12
Custom Setting (See pages 28 to 34)