Operating Instructions

Chapter 1 Basic Menu Features
12
Selecting the Colour Mode
You can copy in the Colour mode selected by the machine, or select the Colour mode manually.
z The default Colour mode settings can be changed. Refer to Copier Settings (Key Operator Mode) in the
Operating Instructions (For Function Parameters) of provided CD-ROM.
z The manually selected Colour mode settings will return to the default settings under the following conditions.
- If the Reset key is pressed.
- If Auto Reset Time interval has lapsed (default = 1 min).
- If the power is turned OFF.
Ex: Full colour
Monochrome
1 Colour
MonochromeFull Colour
Full Colour
Monochrome
2 Colour
1 Colour
1 Place original(s).
z Refer to Placing Originals (See page 6).
2 Press the Copy key if the machine is
set to other function mode.
3 Select “Quality Adj.”.
4 Select the desired Colour mode, and
then select “OK”.
z Auto:
The colour original is copied in Full Colour
and the monochrome original is copied in
black and white by automatically detecting
the original’s colour.
z Black (Monochrome) (See page 14)
z Full Colour (See page 14)
z 2 Colour (See page 15)
z 1 Colour (See page 17)
12