Operating Instructions

Chapter 1 Basic Menu Features
11
Copying with Preset Ratios (Reduction/
Enlargement)
You can easily enlarge or reduce the copy size by selecting the preset size with the Copy Size buttons.
z To change the assigned paper size of Copy Size buttons, select “Paper/Output Tray” and modify the settings.
For setting the paper size and media type for Paper Trays, refer to General Settings (Key Operator Mode) in
the Operating Instructions (For Function Parameters) of provided CD-ROM.
Ex: Enlargement
A4R
Ex: Reduction
A3
A3 A4R
1 Place original(s) in Landscape
Orientation.
z Refer to Placing Originals (See page 6).
2 Press the Copy key if the machine is
set to other function mode.
3 Select a Copy Size.
Ex: Enlargement
Original Size: A4R
Copy Size: A3
The exact ratio (%) is automatically selected.
z Paper Tray will be selected according to the
copy size.
z When the desired size of paper is not set in
the Paper Trays, use the Sheet Bypass. For
using the Sheet Bypass, refer to Adding
Paper <Printing Media> in the Operating
Instructions (For Maintenance) of provided
CD-ROM.
4 Enter the desired number of copies.
5 Press the Start key.
z After finishing copying, press the Reset key to
return to the initial screen of the current active
mode.
(%)
Original Size
(Landscape)
Copy Size (Landscape)
A3 B4 A4 A5
A3 100877150
B4 115 100 82 58
A4 141 122 100 71
A5 200 173 141 100