Operating Instructions User Authentication

Chapter 4 Appendix

Administrator Login

This conrms the system administrator who manages the Panasonic machine. After logging in to the machine,

the system administrator can set up the authentication function.

The login screen appears if the User

Authentication function has been enabled.

Select "User ID", and then enter the

administrator ID, and then choose "OK" .

Ex: panasonic

Select "Password", and then Input the

administrator password, and then choose "OK" .

Select "Domain", and then choose "10 Local

Machine", and then select "OK" .

Select "OK" to start the authentication process.

This completes the authentication.

Refer to Authentication Setting (see page 13) for the registration of Administrator's ID, and

Administrator's Password.

NOTE

In case of network trouble, the administrator can login using the Local Machine domain without being

authenticated through the network.