Operating Instructions Function Parameters

38
Chapter 3 Copier Settings
30 - 39 30 Colour Spec (Overlay) Set the default overlay colour.
z “Preset 1 to 6” can be
selected when you set “20
Add User Colour” in Copier
Settings.
Full, Red, Magenta,
Green, Cyan, Blue,
Black, Yellow, White,
Preset1, Preset2,
Preset3, Preset4,
Preset5, Preset6
Full
31 Mono Colour Judge Level Set the auto detection level for
colour original.
1: Making an original easier to
detect as monochrome.
7: Making an original easier to
detect as coloured.
1 to 7 4
32 Colour Toner Save (T) In colour mode, set the level
of toner saving when the
Original Type is “Text”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
33 Colour Toner Save (T/P) In colour mode, set the level
of toner saving when the
Original Type is “Text/Photo”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
34 Colour Toner Save (P) In colour mode, set the level
of toner saving when the
Original Type is “Photo”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
35 Colour Toner Save (Other) In colour mode, set the level
of toner saving when the
Original Type is “Other Types”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
36 Mono Toner Save (T) In monochrome mode,
set the level of toner saving
when the Original Type is “Text”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
37 Mono Toner Save (T/P) In monochrome mode,
set the level of toner saving
when the Original Type is “Text/
Photo”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
38 Mono Toner Save (P) In monochrome mode,
set the level of toner saving
when the Original Type is
“Photo”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
39 Mono Toner Save (Other) In monochrome mode,
set the level of toner saving
when the Original Type is “Other
Types”.
None, Level 1, Level
2, Level 3, Level 4,
Level 5
None
40 - 44 40 Copy Customise Set whether to indicate the More
Menus functions individually.
41 Reserve a Job Setting
Clear
Set whether to clear to save the
copy job setting of reservation.
z When the optional Hard Disk
is installed.
Save, Clear Clear
No. 32 to 39
After setting any of these parameters, turn the
machine’s power switch Off,
and then On again.
Key Operator
No. Parameter Comments Selective Item
Standard
Setting