Operating Instructions Scanner & EMail

11
Chapter 2 Scan/Email Operations
6 Insert the SD Memory Card.
1 Push the Slot Cover to open it.
2 Insert the SD Memory Card as illustrated.
(Label side up).
7 Select “SD Card”.
z Only one storage device can be selected at
a time. When the “SD Card” is selected as a
storage device, the scanned image cannot
be saved to the PCMCIA/PC Card, or Hard
Disk Drive at the same time.
z
If the setting of Function Parameter “ 84 SD/
PC Card Function
” (General Settings > Key
Operator) is set to “
No ”, the Confirmation
screen displays an “
Function not available "
error message and beeps.
If you do not touch any key for 3 seconds, or
select “
Close ” on the touch panel display, the
machine will display the previous screen.
For more details, refer to
General Settings
in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
8 Press the Start key.
Scanned image is saved in the following
directory of the SD Memory Card.
z Directory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
z The data saved on the SD Memory Card
can be printed by this machine or another
DP-C354, DP-C264, DP-C323, DP-C263 or
DP-C213. For more details, refer to Printing
from SD Memory Card/PC in the Operating
Instructions (for Basic Operations). When
printing PDF data, or high-compression PDF
data, install and set up the Memory Card
Print Utility. For details, refer to the Help of
the Memory Card Print Utility on the
Document Management System CD-ROM.
9 Push the SD Memory Card, and then
remove it.
z Do not remove the SD Memory Card while
the Access Indicator is flashing.
10 Close the Slot Cover.
z When cancelling the operation, press the Stop key
on the Control Panel, and then select “Yes” on the
Touch Panel Display.