Operating Instructions Scanner & EMail

10
Chapter 2 Scan/Email Operations
Chapter 2
Scan/Email Operations
Scan to the SD Memory Card
The scanned image will be directly transferred to the SD Memory Card.
z Be sure to use only Genuine SD Memory Card. (Up to 1 GB)
z The scanned image(s) cannot be saved to the SD Memory Card if the setting of Function Parameter “84 SD/PC
Card Function” (General Settings > Key Operator) is set to “No”.
For more details on this setting, refer to General Settings in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
z The SD logo is a trademark.
1 Place the original(s).
z For instructions on how to place originals,
refer to Basic Operation Procedure (see
page 6). For more details, refer to Placing
Originals (Copy) in the Operating
Instructions (for Basic Operations).
2 Press the Scan/Email key.
3 Select “Basic Menu” to configure the
required settings, and then select
“OK”.
Refer to Scanner Settings (see
pages 40 to 53).
4 Select “Address Book”.
5 Select “SD Card/Hard Drive”.