Operating Instructions Copier

25
Chapter 1 Basic Menu Features
Bleed-Through Prevention
Thin sheets of original can be copied without bleeding through.
z The settings of Bleed-Through Prevention become invalid if Photo is selected in the Original Type.
z
When setting the Tint adjustment to More Blue or More Red, the copies may come out with bleed through contamination.
1 Select “Bleed-Through Prevention”.
z To display this screen, refer to step 1 of
Background Removal (see page 24).
z If Tracing Paper is selected in Original
Type, Bleed-Through Prevention of each
image quality type is set to 3.
2 Adjust the level of Bleed-Through
Prevention with “-” and “+”, and then
select “OK”.
z If you change the Background Removal to
the “Off” position, the Bleed-Through
Prevention will not be adjustable.
3 Select “OK”.
z For the following procedure, refer to steps 6
to 8 of Quality Adjusting (see page 23).
Bleed-
Through
Prevention
There are 6 levels. The higher
the level, the higher it
increases the prevention
effect.