Operating Instructions User Authentication

22
Chapter 3 Setting Machine
Authentication Method Setting
This species which authentication method to use by the User Authentication function.
Select "General Settings".
Press the Function key.
Select the authentication method, and then
choose "OK" .
Select "60 - 79" tab, and then scroll the screen,
and choose "74 Authentication Method".
3
NTLM
Selects NTLM.
Clr Text Selects CLEAR TEXT.
Press the Reset key to return to standby.
Select "09 Key Operator Mode".
Enter the Key Operator's password (8-digit),
and then select "OK" .
Default password is "00000000".
To change this password, select “85 Key Operator
Password” in the General Setting (For Key Operator),
and then re-enter the new password.
Note: