Operating Instructions User Authentication

14
Chapter 3 Setting Machine
Note:
The Sender Selection feature is not enabled if the
fax function is set to require user authentication.
For details, refer to the Operating Instructions (For
Function Parameters, Fax Parameter No. 145).
Select "On" to use authentication or "Off" to
disable authentication, and then choose "OK" .
On
Disables authentication.
Off
Enables authentication.
When user authentication is enabled for the rst
time, you also need to specify the Time Zone,
system administrator's name, and the system
administrator's password.
Select or to specify the Time Zone,
and then choose "OK" .
Enter the system administrator name, and then
select "OK".
Ex: panasonic
Enter the system administrator password, and
then select "OK".
Ex: pana
Note:
The administrator name, and password set here are
required in subsequent setup operations (see page 28).
Please keep it in a safe place.
The function selection display appears (return
to step 6).
To continue with the setup, select the function,
select "On" or "Off", and then choose "OK".
Press the Reset key to return to standby.
Copy Press the " Copy ".
Fax Press the " Fax "
Print Press the " Printer ".
Scan Press the " Scanner ".