Operating Instructions Scanner & EMail

7
Chapter 1 Getting To Know Your Machine
4 Select the location, or destination.
 Scan to SD Card/PCMCIA (PC) Card/
Internal HDD
z The scanned image(s) cannot be saved to
the SD Memory Card, or the PCMCIA/PC
Card if the setting of Function Parameter
“84 SD/PC Card Function” (General
Settings > Key Operator) is set to “No”.
For more details on this setting, refer to
General Settings in the Operating
Instructions (For Function Parameters) on
the provided CD-ROM.
z The scanned image(s) cannot be saved to
the Internal Hard Disk Drive if the Setting of
Function Parameter “02 Scan to HD
Function” (Scanner Settings > Key
Operator) is set to “No”.
For more details on this setting, refer to
Scanner Settings in the Operating
Instructions (For Function Parameters) on
the provided CD-ROM.
 Transfer Scanned Image to:
5 Press the Start key.
z When scanning from the Platen Glass, place
the next original, and then follow the
instructions described on the touch panel
display.
Transferring the scanned image(s) to the SD
Memory Card, or PCMCIA/PC Card,
Computer or Email.
z When cancelling the operation, press the Stop key
on the Control Panel, and then follow the
instructions described on the Touch Panel Display.
SD memory
Card, or
PCMCIA/PC
Card
Select “SD Card/Hard
Drive”, and then select “SD
Card”, or “PC Card”.
z Refer to Scan to the
SD Memory Card (see
page 10).
z Refer to the Scan to
the PCMCIA/PC Card
(see page 12).
Internal Hard
Disk Drive
Select “SD Card/Hard
Drive”, and then select
“Image Box”.
z Refer to Scan to the
Internal Hard Disk
Drive (see page 14).
Scan to a
Computer
When a desired destination
is selected from the address
book, a reception notice
appears on the destination.
z Refer to the Scan to a
Computer (see page
18).
Scan to Email Select “Email”, and then
select desired destination.
z Refer to the Scan to
Email (see page 20).