Operating Instructions Scanner & EMail

40
Chapter 3 Scanner Settings
Chapter 3
Scanner Settings
Setting the Scanning Quality
Documents, whether in Full Colour or Monochrome, are scanned in three-colours.
z Colour mode settings are reset to their factory defaults when:
-The Reset key is pressed.
-The Auto Reset Time interval has lapsed (default = 1 min).
-The power is turned OFF.
-A scan job is completed.
1 Press the Scan/Email key.
2 Select “Basic Menu”.
3 Set the desired scanning modes.
Quality Adjustment
 Colour Setting
1 Select the Colour Mode, and then “ OK ” .
z If the above screen is not displayed. (See
page 40, steps 1 to 3)
Quality Adj.
File Type and Name (see page 48)
Original Size:
From Platen Glass only.
When the original size is not correctly
detected, select “Original Size”, and then
select original size and touch “OK” on the
display.
2-Sided Original (see page 50)
Job Build and SADF (see page 52, 53)
Multi-Size Feed:
When scanning mixed size originals, select
“Multi-Size Feed”.
Ex: A4 and A3 size originals
Full Colour Mode
Colour Original
Three-colours
(Red, Green and Blue)
Grey Scale Mode
Colour Original Grey Scale
(Halftone)
Black Mode
Colour Original Monochrome
(Bi-level)
Monochrome Original
Monochrome
(Bi-level)