Operating Instructions Scanner & EMail

Chapter 2 Scan/Email Operations

Scan to the PCMCIA/PC Card

The scanned image will be directly transferred to the memory card into the PCMCIA/PC Card Adapter.

z Be sure to use only PCMCIA/PC Card Adapter (Type II, 3.3 V Operating Voltage Only) for memory card.

z For types of memory cards that can be used with the PCMCIA/PC Card Adapter, refer to the document that

came with the PCMCIA/PC Card Adapter.

z The scanned image(s) cannot be saved to the PCMCIA/PC Card if the setting of Function Parameter

“84 SD/PC Card Function” (General Settings > Key Operator) is set to “No”.

For more details on this setting, refer to General Settings in the Operating Instructions (For Function

Parameters) on the provided CD-ROM.

Place the original(s).

z For instructions on how to place originals,

refer to Basic Operation Procedure (see

page 6). For more details, refer to Placing

Originals (Copy) in the Operating

Instructions (for Basic Operations).

Press the Scan/Email key.

Select “Basic Menu” to configure the

required settings, and then select

“OK”.

Refer to Scanner Settings (see

pages 40 to 53).

Select “Address Book”.

Select “SD Card/Hard Drive”.