Operating Instructions

38
9
Enter the SMTP Server IP Address
using the Keypad, and then select
"OK".
Enter the Port Number, and then
select "OK".
● If you select "No" for DNS Server Address
in step 11 on page 6, the SMTP Server IP
address is required instead of the SMTP
Server name.
10
1
2
● When entering a 1 or 2-digit number segment,
add "00" or "0" in front of the number to scroll
to the next segment of numbers, or press the
"
" key on the Control Panel to enter a
period after the number.
● To correct a mistake, press or to
move the cursor to the right side of the
incorrect address.
To delete, press "Clear", and re-enter the
correct address.
Enter the SMTP Server Name using
the Keyboard, and then select "OK".
(Up to 60 characters.)
8
Select "Invalid" or "Valid" for
"SMTP Authentication", and then
select "OK".
1
● "SMTP Authentication" is the specification
which added the user authentication
function to SMTP. Attestation of a user
account and a password is performed
between an SMTP server and a user in the
case of e-mail reception, and only when
attested, transmission of e-mail is permitted.
● When "Valid" is selected, it proceed to
step 11.
● When "Invalid" is selected, it proceed to
step 13.
1
2
1
2
2
Email/Internet Fax Settings
Setting up Optional Accessories
■■
■■
■ Setting up the Network Configuration
33_43.pmd 10/11/2006, 08:5138