Operating Instructions - User Authentication

Chapter 3 Setting Machine

Note:

The Sender Selection feature is not enabled if the

fax function is set to require user authentication.

For details, refer to the Operating Instructions for

Function Parameters, Fax Parameter No. 145.

Select "On" to use authentication or "Off" to

disable authentication, and then select "OK" .

On Disables authentication.

Off Enables authentication.

When user authentication is enabled for the ﬁ rst

time, you also need to specify the Time Zone,

system administrator's name, and password.

Enter the Time Zone between -12:00 to +12:00

and then select "OK".

Press "

∗

" key ﬁ rst when entering between

-12:00 to -00:30.

Enter the system administrator name, and then

select "OK" .

Eg: panasonic

Enter the system administrator password, and

then select "OK" .

Eg: pana

Note:

The administrator name and password set here are

required in subsequent setup operations (see page

22 ). Please keep it in a safe place.

The function selection display appears (return

to step 6).

To continue with the setup, select the function,

select "On" or "Off" , and then select "OK" .

Press the Reset key to return to standby.

Copy Selects the copy function.

Fax Selects the fax function.

Print Selects the printer function.

Scan Selects the scanner function.