Operating Instructions - Setting Up

Network Configuration
6
12
Select "Close".
13
Press the Reset key.
14
Turn the Power Switch OFF, and
then back ON again.
●●
●●
● The Power Switch is on the left side of the
machine.
11
Enter the Gateway Address, and
then select "OK".
Ex: 192.168.001.111
1 2
● When entering a 1 or 2-digit number
segment, add "00" or "0" in front of the
number to scroll to the next segment of
numbers, or press the "
" key on the
Control Panel to enter a period after the
number.
● To correct a mistake, press or to
move the cursor to the right side of the
incorrect address. To delete, press "Clear",
and re-enter the correct address.