Operating Instructions - Setting Up

5
Setting Your Machine
7
Enter the IP Address, and then
select "OK".
Ex: 192.168.001.100
1 2
● When entering a 1 or 2-digit number
segment, add "00" or "0" in front of the
number to scroll to the next segment of
numbers, or press the "
" key on the
Control Panel to enter a period after the
number.
● To correct a mistake, press or to
move the cursor to the right side of the
incorrect address. To delete, press "Clear",
and re-enter the correct address.
10
Select "28 TCP/IP Default
Gateway".
9
Enter the Subnet Mask, and then
select "OK".
Ex: 255.255.225.001
1 2
<Continue to the Next Page>
8
Select "27 TCP/IP Subnet Mask".
● When entering a 1 or 2-digit number
segment, add "00" or "0" in front of the
number to scroll to the next segment of
numbers, or press the "
" key on the
Control Panel to enter a period after the
number.
● To correct a mistake, press or to
move the cursor to the right side of the
incorrect address. To delete, press "Clear",
and re-enter the correct address.