Operating Instructions - Setting Up

Network Scanner Settings (Option)
36
■■
■■
■ Scanner Setup Procedure
1.Installing the Panasonic Document
Management System.
(See pages 32-35)
Scanning to PC
Before being able to transfer scanned data to your PC,
the Panasonic Document Management System must
be installed, and the scanner configuration has to be
setup on your PC first.
Scan
Scanned image data will transfer directly to the SD
Memory Card or PCMCIA/PC Card.
The Panasonic Document Management System is
not required when scanning to SD Memory Card or
PCMCIA/PC Card.
Scanning to SD Memory Card or PCMCIA/
PC Card.
or
PCMCIA/PC
Card
SD Memory
Card
Scan
WARNING
!
Keep the SD Memory Card out of the reach of
children to prevent choking or poisoning.
If an SD Memory Card is swallowed accidentally,
get medical treatment immediately.
NOTE
● The SD logo is a trademark.
● Be sure to use only Genuine SD Memory Card
(up to 1 GB).
● Use only PCMCIA/PC PC Card Adapter that are
(TYPE II) with an operating voltage of 3.3 V.
Network Scanner Settings (Option)
3.Check whether the Key Name ,set in
the previous procedure, is displayed
in the machine's Control Panel. For
more details, refer to Scanning in the
Operating Instructions (For Basic
Operations) of provided booklet.
● The Key Name will be disappeared
automatically from the Control Panel
when the PC is disconnected from
the Network/turn off the power, or the
Communication Utility Software is
closed.
● On the machine’s Control Panel, Key
Names registered from the other
PCs are also displayed.
2. Setting up the Scanner Configuration
using the Communications Utility.
(See page 37)