Operating Instructions - Setting Up

30
Fax Driver
The Wizard automatically searches
for machines connected to your
network, and displays the found
units in the Network MFP Device
window.
Select your network MFP, and
then click "Next".
10
■■
■■
■ Installing the Fax Driver
9
Select "Enable communications
(recommended)", and then click
"Next".
8
Check "I accept the terms of the
license agreement", and then
click "Next".
● Make sure that your machine is connected
to the network properly and/or the Power
Switch is ON before clicking "Next".
● Above screen will be displayed when you
have installed the Windows XP Service
Pack 2.
● Only the machines connected to the same
subnet can to be used as a network MFP.
● If your machine has not been connected to
the network yet, enter its allocated IP
Address, and then click "Next" to proceed
with the installation.