Operating Instructions - Setting Up

Installing
Printer/Fax Driver
13
10
Check "Use your machine as a
Network Printer", and then click
"Next".
11
The Wizard automatically searches
for machines connected to your
network, and displays the found units
in the Network Printer window.
12
Select a printer, and then click
“Next”.
Ex: DP-C322
● If you wish to use your machine as a Local
USB printer, see pages 22-27.
● Before clicking “Next”, make sure that your
machine is connected to the network
properly and the Power Switch is ON.
● Only the machines connected to the same
subnet can to be used as a network printer.
● If your machine has not been connected to
the network yet, enter its allocated IP
Address and click “Next” to proceed with
the installation.
9
Select "Enable Communications
(Recommended)", and then click
"Next".
<Continue to the Next Page>
● Above screen will be displayed when you
have installed the Windows XP Service
Pack 2.