Operating Instructions - Copying

77
Chapter 2 More Menus Features
5 Select the colour of the overlay
original from the basic colours and
registered custom colours, and then
select “OK”.
 When selecting from the basic colours
 When selecting from the registered
custom colours
z If “Add Custom” is selected, Add Custom
screen is displayed, and Colours can be
registered. Refer to the New Colour
Registration (see page 14)
6 Adjust the overlay density with “ Lighter ”
and “ Darker ”, and then select “ OK ”.
7 Select the overlay position, and the
select “OK”.
8 Enter the desired number of copies.
9 Press the Start key.
z When the overlay copying is completed, the
overlay original registration confirmation
screen is displayed.
z When copying from the Platen Glass, place
the next original and follow the instructions
described on the touch panel display.
10 Select “Yes” or “No”.
If Hard Disk Drive is installed, you will be
asked where to register the overlay original.
Lighter Overlay density level is
decreased.
Darker Overlay density level is
increased.
Overlay
on Top
Copied with the scanned original
overlaid on the overlay original.
Overlay
on Bottom
Copied with the overlay original
overlaid on the scanned original.
Yes Register the overlay image.
No Clear the overlay image.
<Continue to the Next Page>