Operating Instructions Scanner & EMail

13
Chapter 2 Scan/Email Operations
6 Insert a PCMCIA/PC Card Adapter
with a memory card.
Push on the slot cover to open it.
Insert a PCMCIA/PC card into the PCMCIA/
PC Card slot as illustrated. (Label side up)
7 Select “PC Card”.
z Only one storage device can be selected at
a time. When the “PC Card” is selected as a
storage device, the scanned image cannot
be saved to the SD Memory Card, or Hard
Disk Drive at the same time.
z
If the setting of Function Parameter “ 84 SD/
PC Card Function
” (General Settings > Key
Operator) is set to “
No ”, the Confirmation
screen displays an “
Function not available ”
error message and beeps.
If you do not touch any key for 3 seconds, or
select “
Close ” on the touch panel display, the
machine will display the previous screen.
For more details, refer to
General Settings
in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
8 Press the Start key.
The scanned image is saved into the
PCMCIA/PC Card.
The scanned data is saved on the following
directory of the memory card.
z Directory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
z
The data saved on the memory card in the PC
Card Adapter can be printed by this machine
or another DP-C354, DP-C264, DP-C323, DP-
C263 or DP-C213. For more details, refer to
Printing from SD Memory Card/PC in the
Operating Instructions (for Basic Operations).
When printing PDF data, or high-compression
PDF data, install and set up the Memory Card
Print Utility. For details, refer to the Help of the
Memory Card Print Utility on the Document
Management System CD-ROM.
9 Push the Eject button on the right side
of PCMCIA/PC Card slot, and then
remove the PCMCIA/PC Card Adapter.
z Do not remove the PCMCIA/PC Card while
the Access Indicator is flashing.
10 Close the Slot Cover.
z When cancelling the operation, press the Stop key
on the Control Panel, and then select “Yes” on the
Touch Panel Display.
Eject button