Operating Instructions User Authentication

25
Chapter 4 Appendix
Administrator Name & Password
The user name and password for the system administrator are established in "Authentication Setting" on page
12 when user authentication is enabled for the rst time. Use the following procedure if you subsequently wish
to change the system administrator name or password.
Select "09 Key Operator Mode".
Enter the Key Operator's password (8-digit),
and then select "OK" .
Select "57 Administrator Name".
Input the system administrator name (up to 40
characters), and then press the "OK".
The name is NOT case-sensitive.
Press the Reset key to return to standby.
Input the system administrator password (up
to 40 characters), and then press the "OK".
The password is case-sensitive.
Press the Function key on the Control Panel.
Select "GENERAL SETTINGS".