Operating Instructions User Authentication

Chapter 3 Setting Machine

Continued on the next page...

Job Tracking Setting

This enables or disables Job Tracking. If Job Tracking is enabled, also set the type of log to record and the

Email address to which it is to be sent.

Note:

Before performing this setup, you rst need to register the destination Email address in the address book. Furthermore,

change the setting of the Fax Forward (Fax Parameter No. 54, Fax Forward) parameter to Invalid.

The Job Tracking Setting is enabled when the Copy, Fax / Email, Scan, or Printer is selected on the Authentication

Setting (see page 12).

Select "04 Key Operator Mode".

Select "FAX/EMAIL SETTINGS".

Enter the Key Operator's password (8-digit),

and then select "OK" .

Select "01 Fax Parameters".

Select "131 Job Tracking".

Press the Function key on the Control Panel.