Operating Instructions User Authentication

16
Chapter 3 Setting Machine
ID Timeout Setting
If the ID Timeout Setting is set to "Auto Reset Time", authentication is cancelled if no operation is performed
on the machine for a specied time period after performing authentication. The ID timeout period is set by the
"Auto Reset Time Setting" on page 17.
Press the Function key on the Control Panel.
Enter the Key Operator's Password (8-digit),
and then select "OK" .
Select "09 Key Operator Mode".
Select "GENERAL SETTINGS".
Select "58 ID Timeout".
Auto
Reset
Time
An authenticated user will be logged
out if no operation is performed on
the machine for a specied time after
performing authentication.
After
Every
Job
On completion of a job, the
authenticated user will be logged out
when a new operation is performed.
Press the Reset key to return to standby.
Select the ID Timeout setting, and then select "OK".