Operating Instructions User Authentication

12
Chapter 3 Setting Machine
13
Chapter 3 Setting Machine
Select "On" to use authentication or "Off" to
disable authentication, and then select "OK" .
On Enables authentication.
Off Disables authentication.
When user authentication is enabled for the
rst time, you also need to specify the Time
Zone, the system administrator's name, and the
system administrator's password.
Select or to specify the Time Zone,
and then select "OK" .
Enter the system administrator name, and then
select "OK".
Enter the system administrator password, and
then select "OK".
The function selection display appears (return
to step 6).
To continue with the setup, select the function,
select "OK", select "On" or "Off", and then
select "OK".
Press the Reset key to return to standby.
The administrator's name appears if it is set
previously.
The * symbols appear if the administrator's
password is set previously.
For more details, see Administrator Name and
Password (page 25).
You need to remember the administrator's
name set in this procedure to login as an
administrator. (see page 24)
For more details, see Administrator Name and
Password (page 25).
You need to remember the administrator's
password set in this procedure to login as an
administrator. (see page 24)