Operating Instructions Machine Set-Up

Network Configuration
6
12
Press the Reset key.
13
Turn the Power Switch OFF ( ),
and then back ON ( ) again.
● The Power Switch is on the left side of the
machine.
11
Enter the Gateway Address, and
then select "OK".
Ex: 192.168.1.111
● When entering a 1 or 2-digit number segment,
add "00" or "0" in front of the number to scroll
to the next segment of numbers, or press the
"
" key on the Control Panel to enter a
period after the number.
● To correct a mistake, press " " to move
the cursor to the 1st digit of the incorrect
address.
To delete, press "Clear", and re-enter the
correct address.
1 2
Setting up the Network Configuration