Operating Instructions Basics

21
Copying
Product
Overview
Placing Originals (Copy)
■■
■■
■ How to Place Originals
● On the ADF
Notice for Platen
Align the original to top left corner mark ( ).
● If the original is not positioned properly, a portion of the
original may not be copied.
● For originals smaller than A5 size, position the original
within the A5 area and select A5.
Ex: Book Original Ex: Sheet Original
● On the Platen
Set the originals up to the
upper limit indicator.
ADF Tray
Original Guides
Adjust to the original’s width
Upper Guide
Upper Limit
Indicator
When copying a thick Booklet, open the
ADF and verify that the ADF Hinge was
returned to original position if the rear of
the ADF was raised.
1
2
3
4
Notice for ADF
● Once the originals are set, press Start key, and do not touch the originals as it may cause them to jam.
● Before setting the originals on the ADF, make sure they are free of clips or staples.
Do not use the following materials as the "original".
● Drawing papers, Transparencies, Common Japanese Writing Papers, Labeling paper, Heavy weight
papers, Thin Art papers, Film, Thermal papers, Japanese Papers
Inappropriate Originals
● An original whose size cannot be auto detected
● Mixed Originals with different paper sizes (except combination of A3 and A4)
● Originals with excessively "teared", "creased", "glued", "punched", "folded" or "curled"
● Clipped or stapled
● Double folded or folded
● Originals with fresh correction fluid
Original Guides
A5
A5-R
A4-R
B4
FLS
A3
A4