Operating instructions

52
Internet Fax Features
Sending Documents
■ A3 Size Document Transmission
NOTE
1. Factory default setting for Fax Parameter No. 141 (LAN XMT Reduction) is “Invalid”.
(See page 129)
or
A3
B4
A4
A5
FLS
When transmitting via LAN, the transmitter is
incapable of identifying the receiver's recording
paper size capability, and thus it will not reduce
the document size during transmission.
Therefore, it is recommended that you send only
A4/Letter size documents for LAN
transmission. If a A3 size document is
transmitted and the receiver is only able to print
A4/Letter size documents, the communication will
fail when the temporary setting “A3 EMAIL XMT”
of the Select Mode is set to its default position
(ON).
2
1
5
When the Select Mode “A3 Email Transmit” setting is set to the “OFF” position, the transmission reduction is
according to the setting of Fax Parameter No. 141 (LAN XMT Reduction).
A3 Email Transmit = ON
:
Transmits actual document size (without reduction).
A3 Email Transmit = OFF
:
Reduces A3 size document to B4 size or to A4/Letter before transmission.
(According to the Fax Parameter No. 141 (LAN XMT Reduction) setting, see
Table.)