Operating instructions

128
052 Diagnostic Password (----) Setting the password for Remote Diagnostic Mode. Please ask your
Panasonic Authorized Dealer for details.
053 Sub Address Password (----) Setting a 20-digit password for secured sub-address communication.
054 Fax Forward Invalid Selecting whether the machine performs Fax Forwarding to the
specified destination.
Valid
056 Cover Sheet Off Setting the home position of the Cover Sheet parameter in the Select
Mode.
(See page 74)
On
057 Country Code Selecting the country code when installing your machine.
077 Department Code Invalid Selecting whether the machine performs the Department Code
operation.
(See page 84)
Valid
078 Rotation XMT Invalid Selecting whether the machine performs rotation transmission.
Valid
082 Quick Memory XMT Invalid Selecting whether the machine performs Quick Memory Transmission.
Invalid : Stores all documents into memory first before dialling the
telephone number.
Valid : Starts dialling the telephone number immediately after storing
the first page.
Valid
086 RINGER VOLUME Off Setting the home position of the ringer volume when your machine
receives a call.
Soft
Loud
089 List Output Tray Upper Selecting the Output Tray home position for List printout.
Upper : The List printout exits to the Upper Output Tray.
Bottom : The List printout exits to the Bottom Output Tray.
(DP-2310/3010 : "Inner 1", "Inner 2", "Outer")
Bottom
095 Duplex Print Invalid Selecting whether the machine performs duplex print when A4/Letter
originals are received.
Valid
097 Special Tray
No.1 - 4
(DP-2310/3010: No.1-3)
None Select up to 4 Special Trays that will not be used for printing received
faxes (4-Trays, plus LCT configuration). One Tray must always be
available for receiving Faxes.
(You can specify one Tray (1 ~ 4, LCT) for each selection No. 1, No. 2,
No 3 and/or No. 4)
(DP-2310/3010: 4-Trays only)
Tray 1
Tray 2
Tray3
Tray 4
LCT
099 Memory Size
(Flash Memory)
- Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
118 FAX Function Detect
(Only for DP-2310/3010)
Invalid Setting the number of digits for detecting a Fax Telephone number.
Upon detecting the specified number of digits, the machine will
automatically switch to the FAX Mode when it is in the Copier Mode.
4-Digits
5-Digits
6-Digits
7-Digits
8-Digits
140 LAN Relay XMT Request Invalid Selecting whether the machine performs LAN Relay XMT Request.
Valid
No. Parameter Setting Comments
Setting Your Machine
Fax Parameters