Operating instructions

ManualsBrandsPanasonic ManualsCopiersDP1520

Getting To Know

Your Machine

Before Starting

Making Copies

Function

Network Scanner

(Option)

Appendix

Digital Imaging Systems

Operating Instructions

(For Copy & Network Scan Functions)

Model No. DP-1520P/1820P/1820E

Before operating this equipment, please read these instructions completely

and keep these operating instructions for future reference.

English

Accessories

Problem Solving

Summary of content (76 pages)

PAGE 1
Getting To Know Your Machine (For Copy & Network Scan Functions) DP-1520P/1820P/1820E Before operating this equipment, please read these instructions completely and keep these operating instructions for future reference. English Appendix Problem Solving Network Scanner (Option) Accessories Function Model No.
PAGE 2
Getting To Know Your Machine Useful Office Functions/Operating Instructions Copy Fax/Email • Copy up to A3 size originals. • Capable of copying text/photos/ halftone originals. • Plain Paper High-speed Super G3 compatible Fax with JBIG compression when optional Fax Communication Board (DA-FG180) is installed. (For DP-1820P/1820E only) • Quick-Scan • Quick Memory Transmission • Email Function capability when optional Internet Fax/E-Mail Module (DANF180) is installed.
PAGE 3
Getting To Know Your Machine Operating Instructions Outline Getting To Know Your Machine ● Precautions (See pages 7-13) ● Quick Operation Chart, Adding Paper (See pages 14, 15) ● Problem Solving, Memory Full, Replacing Toner Bottle/Toner Waste Container, Removing Misfed Paper, Error Codes (U Code/J Code) (See pages 15-21) Before Starting ● Control Panel Key/Indicator Names Making Copies ● Operating Instructions for making copies (See pages 24-43) Function Accessories Network Scanner (Option) Prob
PAGE 4
Getting To Know Your Machine Symbols/Icons A B C The following Symbols/Icons are used throughout this operating instructions manual. Place original(s) on the ADF/i-ADF Getting to know your machine Before starting Place original on the Platen (Book) When making copies Place original on the Platen (Sheet) Press any Hard Key on the Control Panel When setting the machine modes Press Hard Key Accessories Input numbers ● Number of Copies, etc.
PAGE 5
Getting To Know Your Machine Getting To Know Your Machine Table of Contents Getting to Know Your Machine Useful Office Functions/Operating Instructions .......................................................................... 2 Multi-Tasking Job Table .................................................................................................................. 2 Operating Instructions Outline ......................................................................................................
PAGE 6
Getting To Know Your Machine Table of Contents Function ■ Using Function Modes to Change the Initial Machine Modes ........................ 44 ■ Procedure ....................................................................................................... 44 ■ General Settings ............................................................................................ 46 ■ General Settings (For Key Operator) ............................................................. 46 ■ Copier Settings ..............
PAGE 7
Getting To Know Your Machine Getting To Know Your Machine Precautions ■ Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
PAGE 8
Getting To Know Your Machine Precautions For Your Safety To prevent severe injury and loss of life, read this section carefully before using the Panasonic DP-1520P/1820P/1820E to ensure proper and safe operation of your machine. ■ This section explains the graphic symbols used in this Operating Instructions manual. WARNING: Denotes a potential hazard that could result in serious injury or death. CAUTION: Denotes hazards that could result in minor injury or damage to the machine.
PAGE 9
Getting To Know Your Machine Never touch a power cord with wet hands. Danger of electric shock exists. If the power cord is broken or insulated wires are exposed, contact your Service Provider for a replacement. Using a damaged cord can cause fire or electric shocks. Stop operation immediately if your machine produces smoke, excessive heat, unusual noise, or smell, or if water is spilt onto the machine. These conditions can cause fire.
PAGE 10
Getting To Know Your Machine Precautions CAUTION Do not place a magnet near the safety switch of the machine. A magnet can activate the machine accidentally, resulting in injuries. Do not use a highly flammable spray or solvent near the machine. It can cause fire. When copying a thick document, do not use excessive force to press it against the document glass. The glass may break and cause injuries. Never touch a labelled area found on or near the heat roller. You can get burnt.
PAGE 11
Getting To Know Your Machine For Your Safety ■ The maximum power consumption is 1.3 kW. A properly wired (grounded), dedicated, 240V ,15A outlet is required. Do not use an extension cord. The power cord on this machine must be used to disconnect the main power. Please ensure that the socket outlet is installed near the machine and is easily accessible. Caution Note: Unplug the power cord from the wall outlet before removing covers.
PAGE 12
Getting To Know Your Machine Precautions Ventilation ■ The machine should be installed in a well-ventilated area to minimize the ozone density in the air. WARNING For U.K. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug.
PAGE 13
Getting To Know Your Machine Handling ■ Do not turn the Power Switch Off or open the Front Cover during copying. ■ Energy Save Mode Notice ● The following function, will not work if the Energy Saver Mode setting is set to the Shutdown mode. When using any of the following functions, we recommend that you leave the Energy Saver Mode in the initial factory default setting (Sleep).
PAGE 14
Getting To Know Your Machine Operation Chart ■ Quick Operation Chart 1 2 Face Up A B C From ADF/i-ADF (Option) Original Guides∗ Tray Original Guides ● If the original is not positioned properly, a portion of the original may not be copied. ● For originals smaller than A5 size, position the original within the A5 area and select A5. A3 B4 Turn the Power Switch to the ON position A4-R Face Down A5 From Platen Adding Paper If set in other function mode Adjust to the (Max.
PAGE 15
Getting To Know Your Machine 3 4 Reduction/ Enlargement only From Platen only A4 ->A4 [A4 ] ZOOM:100% COPIES:001 5 A4 ->A5 [A5 ] ZOOM: 71% COPIES:001 Number of Copies (Max.
PAGE 16
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Replacing Toner Bottle/Toner Waste Container 1 (ATTENTION) ● For optimum copy quality use the recommended Panasonic Toner. Store Toner Bottle in a cool dark place. Do not unseal the Toner Bottle unless you are ready to use it. Front Cover 2 Toner Waste Container 6 Corona Cleaner NOTE: Do not reuse the toner from the Toner Waste Container.
PAGE 17
Getting To Know Your Machine 3 Cap 4 5 Corona Cleaner Handle 6 Toner Bottle (Empty) Toner Waste Container To Release 8 9 Toner Bottle (New) 10 Toner Waste Container (New) Toner Bottle (New) Close the Front Cover.
PAGE 18
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Removing Misfed Paper (ADF: Option for DP-1520P/1820P/1820E) (J70, J71, J79, J92, J93) 1 2 (Ex.) REMOVE MISFED PAPER J70 Misfed Paper ADF Cover ● Removing Misfed Paper (i-ADF: Option for DP-1820E) (J70, J71, J72, J73, J76, J78, J79, J92, J93) 1 2 (Ex.
PAGE 19
Getting To Know Your Machine 3 4 ADF Misfed Paper ADF Cover 3 4 5 Misfed Paper 6 Exit Unit ADF Tray 8 Misfed Paper 9 10 2 1 ADF Cover 3 4 5 6 Misfed Paper Paper Tray Pull-out Misfed Paper 19
PAGE 20
Getting To Know Your Machine ■ Problem Solving ● Removing Misfed Paper (J19, J32, J82, J85, J87: ADU for DP-1820E only) 1 EX. REMOVE MISFED PAPER J82 2 Left Cover Misfed Paper ● User Error Codes (U Code) U20 U21 U90 U01 U13 U14 U15 U16 U25 U07 Code U01 U07 U13 U14 U15 U16 20 Check Points Front and/or Left Cover is open. Feed Cover is open. (See page 18) Low Toner or Out of Toner. Toner Waste Container is full. Toner Waste Container is incorrectly installed. Developer Unit is incorrectly installed.
PAGE 21
Getting To Know Your Machine 3 Misfed Paper 4 5 Misfed Paper Jam Removal Knob Left Cover ● Jam Error Codes (J Code) Code J00 J01 J02, J03, J04 J07, J08, J09, J12, J13, J14, J22, J23, J24 Check Points Remove paper from the Sheet Bypass. Open and close the Left Cover (Shown in above step 5 illustration).
PAGE 22
Before Starting Control Panel 1 2 3 4 5 16 15 14 6 7 8 9 Icon 29 Contents INTERRUPT Key Selects Interrupt mode. (See page 42) ERASE Key Selects Edge, Book or Margin mode. (See page 35) 1 3 No. Icon 2 4 MEMORY Keys Selects Job Memory mode. (See pages 42, 43) 5 6 Original Mode Select Keys/Indicators Selects original mode. (See pages 25 and 60) 7 8 Energy Saver Key Saves power while the machine is not in use. (See page 42) ORIGINAL SIZE Key To select an original size.
PAGE 23
19 20 21 22 Before Starting 18 ∗ Used for Fax, Internet Fax, and Email Functions. (except for the ABBR Key) (See page 61) 23 27 26 No. 17 19 Icon 25 24 Contents PAPER TRAY Key Selects the paper tray. 20 21 RESET Key Resets all features to the initial power-on state. 23 START Key Starts the copy job. 25 CLEAR Key Clears the copy count in the display. 29 18 Cursor Key To select the zoom ratio, etc. Keypad Sets copy quantities or inputs the parameter(s) of Function settings. 27 No.
PAGE 24
Making Copies Basic Copy ■ Copying the Same Size Originals (1:1) Copy size is automatically selected.
PAGE 25
4 Select type of Original(s) PHOTO : Mainly Photo TEXT/PHOTO: Text and Photo combined TEXT : Mainly Text Making Copies 3 Number of Copies (Max. 999) Adjust the Manual Exposure Press DARKER or LIGHTER Key (5 steps) ■ Using the ADF/i-ADF (Option) Set the originals up to the Upper Limit Indicator/Guide.
PAGE 26
Making Copies Creative Features ■1 1 2 Copy, 2 2 Copy 2 Copy, 2 1-Sided 1 Copy (DP-1820E with optional i-ADF only) 1 For i-ADF 2 2-Sided Copy From Platen only for 1 2 Copy or 2 2 Copy 2-Sided 2-Sided Copy (1 2 1 Copy 2-Sided 2 Copy only) 1-Sided Copy Steps 6 to 9 for 1 from Platen: 6 NOTE: 1. When copying 2 2 or 2 1 Copy using the optional ADF, see below. 2. If the memory overflows while scanning originals, all scanned data will be cancelled. If this occurs, restart from Step 1.
PAGE 27
5 4 Bind Position within 10 seconds 2 Copy, 2 (For 1 1-Sided Original to 2-Sided Copy 2-Sided Original to 2-Sided Copy 6 2-Sided Original to 1-Sided Copy 8 9 From Platen only. 1 Copy) Long Edge ~ Number of Copies (Max. 999) Short Edge 9 10 The following steps, illustrate how to make multiple copies when the Sort Mode is selected. (See page 36) ANOTHER ORIGINAL? 1:YES 2:NO 1: YES 2: NO Exits this mode. Continues to copy another original, repeat steps 1 and 5- 2 to step 8.
PAGE 28
Making Copies Creative Features ■ Book Book 2 Copy (DP-1820E only) For BooK Format is Flipping: 2-Sided Copy The book format and page order can be set in the Copier Settings, "Parameter No. 14 BOOK 2 DEFAULT" (See page 50) 1 2 Original Size: A3, B4, A4-R or A5-R (Book Format: Flipping) (Page Order: L R) 5 (Book Format: Facing) NOTE: ∗ If the selected original size is not corrected, book original will not be copied correctly as sample images.
PAGE 29
3 4 Making Copies 5 Select Book Original to 2-Sided Copy∗ Number of Copies (Max. 999) 6 Exits this mode. 3 NOTE: ∗ A copy size will be automatically selected. If a selected copy size paper is not set into the paper tray(s), set paper on the Sheet Bypass (See page 14) or select another copy size with COPY SIZE Key (See page 25).
PAGE 30
Making Copies Creative Features ■ N in 1 From two/four 1-Sided originals, side by side, to 1-Sided pages. 1 2 For ADF ● 2 in 1 Copy For i-ADF From Platen only ● 4 in 1 Copy 1 2 or 1 2 3 4 3 4 NOTE: If the original's Orientation is incorrect when N in 1 copy mode is used, the copy sequence may not reproduce properly. If this occurs, change the N in 1 default Orientation in the Copier Settings, "Parameter No. 05 N in 1 DEF.
PAGE 31
3 For Preset Ratios For Variable Zoom Ratios 4 A3 : A3 B4 : B4 A4 : A4 A4 : A4-R A5 : A5 A5 : A5-R Making Copies 5 Up to 200% in 1% Down to 50% in 1% 6 7 8 Step 7 to 11 for Platen only ANOTHER ORIGINAL? 1:YES 2:NO 9 1: YES Go to next step. Number of Copies (Max. 999) Next Original NOTE: If “2: NO” is selected, the machine will start copying one side of the scanned original. 12 The following steps, illustrate how to make multiple copies when the Sort Mode is selected.
PAGE 32
Making Copies Creative Features ■ 2 Page Copy 1 Copying two facing pages or a A3 size original on two separate A4 size sheets. 2 Platen Example: A3 size original A3 Page Order: L→R Starts copy from Left page A4 A3 6 The following steps, illustrate how to make multiple copies when the Sort Mode is selected. (See page 36) ANOTHER ORIGINAL? 1:YES 2:NO Page Order: R→L Starts copy from Right page NOTE: The page order can be set in the Copier Settings, "Parameter No. 16 2 PAGE MODE DEF.
PAGE 33
3 4 5 6 Select A3, B4, A4-R or A5-R size∗1 Original Size A3 A4 Copy Size A4 A5 Number of Copies (Max. 999) 7 NOTE: ∗1 If the selected original size is not corrected, book original will not be copied correctly as sample images. ∗2 A copy size will be automatically selected. Exits this mode. 3 If a selected copy size paper is not set into the paper tray(s), set paper on the Sheet Bypass (See page 14) or select another copy size with COPY SIZE Key (See page 25).
PAGE 34
Making Copies Creative Features ■ Erase (Margin/Edge) Margin 1 2 For ADF Shifts image to left, right, top or bottom.∗ For i-ADF From Platen only Edge Creates a blank edge.∗ NOTE: ∗ Shift position of Margin and blank edge value can be changed with Copier Setting Mode.
PAGE 35
3 4 5 ERASE MODE (1-3) ENTER NO. OR ∨ ^ 1:MARGIN? PRESS SET TO SELECT or This Key will flash. or 6 Making Copies 2:EDGE? PRESS SET TO SELECT : MARGIN : EDGE ERASE Key will be changed from flashes to lights. 7 8 Exits this mode. Number of Copies (Max. 999) 3 4 ERASE MODE (1-3) ENTER NO. OR ∨ ^ 5 3:BOOK? PRESS SET TO SELECT 6 or 7 : Book 8 Exits this mode. Number of Copies (Max.
PAGE 36
Making Copies Creative Features ■ Effects (Centering/Image Repeat) 1 Centering 2 Copy image can be centred automatically on selected paper. Open the ADF or Platen Cover Image Repeat Creates continuous copy image on one sheet. Minimum original size: 20 x 20 mm. 6 The dotted line can be set to “None” or “Print” by the Copier Settings, "Parameter No. 15 IMAG. REPEAT DOT." (See page 50). ■ Sort 1 Sort Number of Copies (Max. 999) 2 For ADF Multiple copy sets are sorted automatically.
PAGE 37
3 EFFECTS (1-2) ENTER NO. OR ∨ ^ 4 1:CENTERING? PRESS SET TO SELECT 5 PAPER TRAY TRAY-1 ∨ ^ or 2:IMAGE REPEAT? PRESS SET TO SELECT : Centering : Image Repeat TRAY-1 TRAY-2 TRAY-3 TRAY-4 BYPASS 7 NOTE: Tray-2, 3 and 4 are options. (See page 59) Exits this mode. NOTE: An incorrect position detection of the original may occur when a strong light shines onto the glass during the Centering and Image Repeat mode.
PAGE 38
Making Copies Other Features ■ Skyshot Mode Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened. Two types of Skyshot modes can be selected; Digital Skyshot Mode : The scanning area (size) is not pre-determined. Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
PAGE 39
Making Copies 3 NOTE ● An incorrect detection of the original may occur when a strong light shines onto the glass during digital skyshot mode. ● Incorrect exposure may occur when there is a black line at the edge of the original or an image which the machine interprets as a black pattern in the digital skyshot mode. Number of Copies (Max. 999) 2 3 Custom size∗ or ∗ Default M1/M2 size can be changed by Function mode. (See page 50) Number of Copies (Max.
PAGE 40
Making Copies Other Features ■ Job Build and SADF Mode 1 Special originals (like thin paper, etc.) can be fed from the ADF Tray and copied continuously using the Job Build and SADF Mode. NOTE: Set the Copier Setting No. 12 (SADF DEFAULT) to “OFF” position in advance. (See page 51) Thin paper: minimum 55 g/m2 2 For ADF For i-ADF Select desired settings Place one Original at a time or up to 50∗ sheets (80 g/m2) ∗ 30 sheets/B4, A3 Example: To make 5 sets of sorted copies of 80 sheets of originals.
PAGE 41
3 4 For ADF Starts the printing process. Making Copies For i-ADF Place the next original within 5 sec. of last ejected original. Number of Copies (Max. 999) 3 4 5 For ADF Place the next original within 5 sec. of last ejected original. (30 sheets) For i-ADF Select the Sort mode Lights Sort mode is selected. Number of Copies (Max. 999) (ex. 5) 3 4 When starting the printing process: Set the next copy job, repeat steps 1 to 3. Next original(s) will be scanned. Starts the printing process. (ex.
PAGE 42
Making Copies Other Features ■ Interrupt Mode This mode interrupts the current running copy job and allows other copy jobs to be processed. 1 2 Other Job For ADF or For i-ADF (See pages 24-37) ■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode) These modes save power while the machine is not in use. Power Saver Mode To enter To exit Automatically enters the Power Saver 10 or Mode after minutes∗ from the last job.
PAGE 43
4 Other Job is completed 5 6 Making Copies 3 Power Consumption Warm Up Time Unavailable Functions Standby Modes Approx. 120 W — ———————— Power Saver Approx. 19.5 W Approx. 30 sec. ———————— Sleep Approx. 9.5 W Approx. 30 sec. ———————— Shutdown Approx. 1.6 W Approx. 30 sec.
PAGE 44
Function ■ Using Function Modes to Change the Initial Machine Modes Option General Settings Copier Settings Printer Settings Fax/Email Settings Scanner Settings Input Key Operator Password (See page 13) General Settings for Key Operator Copier Settings for Key Operator General Settings: Printer Settings for Key Operator Changing the Initial Machine Modes ● Power On Default Mode, Key Operator Mode, etc. (See page 46) For Key Operator: Paper Size, Department Counter, Network TCP/IP settings, etc.
PAGE 45
Copier Settings: Changing the Initial Copy Modes ● Default function of each copy mode. (See pages 49 and 50) For Key Operator: Original mode, Contrast, etc. (See pages 50 and 51) Printer Settings: Changing the Initial Printer Modes Scanner Settings: Function ● Default function of each print mode. (See page 51) For Key Operator: Job completion time, Page protection, Error page print, Spool function, PS configuration, Font list print, Mailbox data handling, etc.
PAGE 46
Function ■ General Settings No. Modes Function Initial Setting 00 POWER ON DEFAULT Selects the default operation mode. 1:COPY / 2:PRINTER / 3:SCANNER (SCANNER is option, see page 59) 1: COPY 01 SORT MEMORY USAGE Selects whether to display the amount of sort memory used on the control panel. 1:OFF / 2:DISPLAY 1: OFF 02 DEPT. COUNTER Displays the Total Copy usage and copy limit of Consult your the selected department. authorized service provider 03 SORT-ROTATE Selects the rotate-sort mode.
PAGE 47
■ General Settings (For Key Operator) (Continued) Modes Function Initial Setting 08 SPECIAL TRAY 2 Selects the paper tray to use for special paper. 1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 / 5:TRAY-4 / 6:BYPASS (Only available when optional TRAY-2 and 3/4 are installed. See page 59) 1:NONE 09 KEY/TOUCH BEEP Selects the default key sound level. 1:OFF / 2:SOFT / 3:LOUD 2:SOFT 10 BYPASS SET BEEP Selects whether to sound a Beep when paper is 1:INVALID set on the Sheet Bypass.
PAGE 48
Function ■ General Settings (For Key Operator) (Continued) No. Initial Setting Function 25 HARD DISK FORMAT∗1 Formats the hard disk. PRESS SET TO START 26 HARD DISK ERR CHK∗1 Selects the provision for the hard disk error check. PRESS SET TO START 27 ABBR GROUP ID Inputs the Group ID for the address book. 0-99 0 28 COMMUNITY NAME(1)∗2 Selects whether to change the Community Name(1) SNMP. Enable read only public 29 COMMUNITY NAME(2)∗2 Selects whether to change the Community Name(2) SNMP.
PAGE 49
■ Copier Settings No. Modes Initial Setting Function MARGIN DEFAULT Selects the margin shift value. 1:LEFT 1:POSITION / 2:VALUE 10 mm 1:LEFT / 2:RIGHT / 3:TOP / 4:BOTTOM Procedure: Select "1:POSITION" and select a Margin position then, select "2:VALUE" and input a shift value with Keypad. 01 EDGE DEFAULT Selects the edge width. 1:EQUAL RATE (X & Y) / 2:INDIVIDUAL Procedure: Select "1:EQUAL RATE (X & Y) " or "2:INDIVIDUAL" then, input a edge value with Keypad.
PAGE 50
Function ■ Copier Settings (Continued) No. Modes Initial Setting Function 11 SORT PRIOR. GLASS Selects the sort priority when using the Platen. 1:NON-SORT / 2:SORT 1:NON-SORT 12 1→2 BINDING DEF. Selects the binding location for 1→2 Copy. 1:LONG EDGE / 2:SHORT EDGE 1:LONG EDGE 13 2→1 BINDING DEF. Selects the binding location for 2→1 Copy. 1:LONG EDGE / 2:SHORT EDGE 1:LONG EDGE 14 BOOK → 2 DEFAULT Selects the page layout of the Book→2 copy.
PAGE 51
No. Modes Initial Setting Function 10 TONER SAVE (T/P) Selects the Toner Save Level to use for the Text/Photo mode. 1:NONE / 2:LEVEL1 / 3:LEVEL2 1:NONE 11 TONER SAVE (PHOTO) Selects the Toner Save Level to use for the Photo mode. 1:NONE / 2:LEVEL1 / 3:LEVEL2 1:NONE 12 SADF DEFAULT Selects whether the Job Build and SADF Mode is enabled. 1:OFF / 2:ON 1:OFF ■ Printer Settings Modes Initial Setting Function 00 NUMBER OF PRINTS Sets the default number of prints.
PAGE 52
Function The following Parameter Settings require the input of the Key Operator Password: ■ Printer Settings (For Key Operator) No. Modes Initial Setting Function 00 PRINTER SETTINGS Prints the printer settings. PRESS SET TO PRINT 01 COMPLETION TIME Sets the job completion time setting. 1-999SEC 02 PAGE PROTECTION Selects whether to enable automatic 1:OFF compression when the received data exceeds the page memory capacity.
PAGE 53
■ Scanner Settings (Scan Parameters) Modes Function Initial Setting 00 SCANNER SETTINGS Prints the scanner settings. PRESS SET TO PRINT 01 ORIGINAL MODE Selects the default Halftone setting for the originals. 1:TEXT / 2:TEXT/PHOTO / 3:PHOTO 2:TEXT/PHOTO 02 COMPRESSION MODE Selects the default compression mode setting. 1:MH / 2:MR / 3:MMR / 4:JBIG 4:JBIG 03 RESOLUTION Sets the default resolution setting.
PAGE 54
Function For Example ■ Changing the Paper Size (Paper Tray) The Paper Trays are designed to accommodate A5, A4, and B4 Size paper. 1 2 3 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ 1:GENERAL SETTINGS PRESS SET TO SELECT or 1: General Settings Select a Paper Tray 6 KEY OPR.MODE (00-31) ENTER NO. OR ∨ ^ 7 01 PAPER SIZE 1:TRAY-1[A4 8 ] or 1:TRAY-1 2:TRAY-2 3:TRAY-3 4:TRAY-4 NOTE: TRAY-2, 3, 4 are options (See page 59) 01 PAPER SIZE 12 Paper Tray 13 14 Paper Guide B ex.
PAGE 55
4 5 GENERAL PARAM. (0-9) ENTER NO.
PAGE 56
Function For Example ■ Department Counter The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers for each department. (Maximum Number of Departments: 300) Contact your authorized service provider to enable the Department Counter feature. 1 2 3 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ or 1: General Settings 6 7 KEY OPR. MODE (00-31) ENTER NO. OR ∨ ^ 13 DEPT. COUNTER MODE 1: TOTAL COUNTER or 13 DEPT.
PAGE 57
4 5 GENERAL PARAM. (0-9) ENTER NO. OR ∨ ^ 09 KEY OPERATOR MODE ENTER PASSWORD= 6 or 3-digit (See page 13) 9 (09 KEY OPERATOR MODE) 8 DEPT. CODE (1-300) ENTER NO. OR ∨ ^ 9 DEPT. COUNTER 001:123450 MAX COPIES 001:123456 ID CODE SET 001:0123 Function SET SET DEPT. COUNTER 002:123500 MAX COPIES 002:125000 ID CODE SET 002:45678 Department No (01-50) 11 SET Next Department 10 or 3 KEY OPR. MODE (00-31) ENTER NO.
PAGE 58
Function Combined Function Table 1 2 2 1∗ 2 2∗ Book 2 2 Page N in 1 Sort/Rotate-Sort Non-Sort Zoom Edge Book Margin Image Repeat Centering Interrupt Manual Skyshot Digital Skyshot Double Exposure : Possible Combined Functions. : Unavailable Combined Functions. A : Next Selection is Carried Out. R : When the same function is selected twice, the second selection is ignored. : Functional combination that cannot be performed.
PAGE 59
Accessories Components ■ The DP-1520P/1820P/1820E is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabilities will make your office-place more productive and efficient. ■ Options Image Memory (DA-SM16B/64B/28B) ● 16/64/128 MB ● To increase the memory capacity for electronic sorting.
PAGE 60
Network Scanner (Option) Document Scanning ■ Document Scanning When Panasonic Document Management System (Panasonic-DMS) is installed and configured on your PC, document(s) can be scanned from the the machine to your PC. Direct Connection (with Crossover Cable, see page 66) ● Document Scanning directly from the Machine to your PC using Windows “My Network Places” or “Network Neighborhood”. NOTE: USB Port is used for printing only, and is not available for local scanning.
PAGE 61
Select a Station (PC's Address) 3-1 ABBR 3-2 3-3 4 ABBR No. (2-digit) ABBR [_ ] ENTER ABBR No. DIRECTORY SEARCH 3-1 [01]SALES 10.74.252.66 3-2 SCANNING DOCUMENT PAGES=001 01% 3-3 4 Enter letter(s) ENTER LETTER(S) _ ENTER LETTER(S) SA_ ONETOUCH* [06]SALES_3 [05]SALES_2 10.74.252.66 [01]SALES 10.74.252.66 10.74.252.66 3-1 3-2 NOTE "ONE-TOUCH" is available when the optional Keyboard (DAKB180) is installed. 4 Network Scanner (Option) 3 Keyboard (Option) <10>PANA 10.74.252.
PAGE 62
Network Scanner (Option) Address Book ■ Adding your PC's IP Address If the Scanner Configuration is not set with the Panasonic Communications Utility of Panasonic-DMS software (refer to Panasonic-DMS CD-ROM), input your PC's IP Address using the machine's Keyboard. 1 2 3 02-APR-2004 04:28 READY TO SCAN FUNCTION (1-2) ENTER NO. OR ∨ ^ or 1: SET MODE 7 8 1:ONE-TOUCH 2:ABBR No. For ONE-TOUCH 9 ONE-TOUCH< > PRESS ONE-TCH OR ∨ ^ IP ADDRESS <01> : ONE-TOUCH One-Touch Key or : ABBR No.
PAGE 63
4 1:SET MODE ? PRESS SET TO SELECT 5 6 SET MODE (1-2) ENTER NO. OR ∨ ^ 1:ADDRESS BOOK ? PRESS SET TO SELECT 7 10 11 Enter Station Name (See page 60) PORT NUMBER 6509 : PC <01> (Max. 40 characters) FTP: Consult with your network When inputting a special character, administrator. press "_/()..." Key and use the ( / ) Cursor Keys to select a character. When changing the inputted character, move cursor ( ) back to the character and press the CLEAR Key then input a new character.
PAGE 64
Network Scanner (Option) Function ■ Scan Parameters 1 2 3 02-APR-2004 04:28 READY TO SCAN FUNCTION (1-2) ENTER NO. OR ∨ ^ or 1: SET MODE 7 SCAN PARAM (0-6) ENTER NO. OR ∨ ^ Refer to Function settings on page 53. ● Prints Scanner Settings List, Sets Original Mode, Sets Compression Mode, Sets Resolution, Sets Bind Position, Sets File Type/Name or ■ Select Mode When adding a file name or selecting a compression format before scanning document(s).
PAGE 65
4 1:SET MODE ? PRESS SET TO SELECT 5 6 SET MODE (1-2) ENTER NO. OR ∨ ^ 2:SCAN PARAMETERS ? PRESS SET TO SELECT 7 2:SELECT MODE? PRESS SET TO SELECT 5 SELECT MODE (1-2) ENTER NO.
PAGE 66
Network Scanner (Option) Direct Connection (with Crossover Cable) ■ Direct Connection (with Crossover Cable) 1 2 Connect a Crossover LAN Cable between your machine and the PC. Turn OFF* the Power Switch (Machine and the PC). LAN Cable (Crossover) To PC LAN Cable (Crossover) To Machine (Right Side of Machine) (Rear Side of PC) NOTE: Do not use Standard LAN Cable. 5 Turn OFF* and ON the Power Switch (Machine and the PC).
PAGE 67
3 4 Turn On the Power Switch (Machine and the PC). Input the Network Address (Machine and your PC). ● IP and Gateway Address IP: 192.168.0.1 (Machine) 192.168.0.2 (Your PC) Subnet Mask: 255.255.255.0 (Machine & the PC) ● How to input the network address: For your Machine: See page 56 For your PC: See below 5 For more detailed information, refer to Windows OS operating instructions manual. For Windows 2000 5 3 4 1 Right click "My Network Places" and select "Properties".
PAGE 68
Problem Solving Troubleshooting Check Action Unit Does Not Operate Does the display light? Check if the Power Switch (Main Power Switch on the Right Side of the machine) is turned ON and if the power cord is plugged into the AC outlet. Does the Energy Saver key flash (or light) and the display is turned OFF? (See page 42) Press Energy Saver key on the control panel. Does any of the U## codes and messages appear on the display? (U01, U07, U13, U14....etc.
PAGE 69
Check Action Marked Copies Is the machine’s Platen Glass or Platen Sheet dirty? Clean the Platen Glass or Sheet. Is the original an OHP film or a dark original? Cover the original with a sheet of white paper before copying or lighten the exposure setting. Clean the Corona Wire of the Drum Unit. (See page 16) Check the copies. If a dark vertical line is remained, repeat above step to clean the Corona Wire became dark vertical line is erased. If a dark verical line of 2-3cm in width is printed.
PAGE 70
Problem Solving Replacing the Battery/Set the Date and Time The machine has an internal battery (Product No.: CR2032) which maintains the date and time. In the event the battery requires replacement, the following message will be displayed. REPLACE BATTERY 1 2 Battery Holder Turn the Power Switch on the Right Side of the machine to the OFF position. If the Hard Disk Drive Unit (DA-HD18) is installed, see page 13) U90 Remove 1 Screw. Remove the Battery Holder.
PAGE 71
3 4 New Battery Holder 5 Turn the Power Switch on the Right Side of the machine to the ON position. Used “+” side of battery should be up side. (Observe the polarity, see CAUTION! below) 7 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ 6 Re-install the Battery Holder. Install 1 Screw. 8 9 GENERAL PARAM.(0-9) ENTER NO.
PAGE 72
Appendix Specifications ■ DP-1520P/1820P/1820E (For Copier) Type: Desk Top Platen Type: Fixed Acceptable Originals: Sheets, Books (max. A3 size) Copying Method: Laser Electrophotography Fusing Method: Heat Roller Imaging Method: Dry-Type Dual Components Imaging Resolution: Max. 600 dpi Operation Panel: LCD Display Copy Size: A3 - A5 via Paper Tray Void Area: Max. 0.2″ (5 mm) Warm Up Time: Approx. 30 seconds (20°C) First Copy Time: Less than 7.
PAGE 73
■ Network Scanner (DA-NS180) Scanning Type: Scanning Speed: (w/o Transmission Time) Resolution (dpi/Monochrome): Max Scanning Area (Platen): Max Scanning Area (ADF): Duplex Scan: Scanning Mode: Scale: CCD Image Sensor (ADF/Platen) 19 sheets/minute (A4) Standard (150 x 150) / Fine (300 x 300) / SuperFine (600 x 600) A3 (297 x 420 mm) A3 (297 x 420 mm) No Text, Text/Photo, Photo Bi-level / 256-level Gray Scale Compression Format: File Format: Send to Station (PC): MH, MR, MMR, JBIG Multi-page TIFF, PDF Yes
PAGE 74
Appendix Options and Supplies ■ Options Part Name Part No.
PAGE 75
IMPORTANT INFORMATION When requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine. For your convenience, space is provided below to record information you may need in the future. Model No. Serial No.
PAGE 76
For Service, Call: For Customer Support: Panasonic Communications Co., Ltd. Fukuoka, Japan http://www.panasonic.co.