Operating Instructions DP-1810P with Options (For Copier) DP-2010E with Options DP-1510P/1810P/2010E Getting To Know Your Machine Options Making Copies Model No. Before Starting Digital Imaging Systems Before operating this equipment, please read these instructions completely and keep these operating instructions for future reference. English P01_1810_2010_GAP(gbr).
IMPORTANT INFORMATION When requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine. For your convenience, space is provided below to record information you may need in the future. Model No. Serial No.
Getting To Know Your Machine Operation Chart Common Features and Usage ■ Basic Operation Original 1 Load Paper Turn the Power Switch On Place the Original 2 3 4 5 Original Size (Reduction/ Enlargement Only) Copy Size Number (Reduction/ of Copies Enlargement Only) Press START ■ Position of the Original From Platen Original Guide A5 ADF Tray Original Guides Adjust to the original’s width FLS1 A5 A4 FLS2 B4 A3 FLS B4 A3 A3 A4 A4 FLS·B4 A4 A5 A4 R A5 A5 A5 R From ADF (or i-ADF) C Pl
Energy Star As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. This voluntary program specifies certain energy consumption and usage standards. This product will automatically “power down” after a specified period of non-use. The use of this ENERGY STAR® compliant product will reduce energy consumption and ultimately benefit the environment. The default functions can be adjusted depending on your office requirements.
Table of Contents Table of Contents Getting To Know Your Machine Operation Chart .............................................................................................................................. 3 ■ Common Features and Usage .............................................................. 3 Energy Star ..................................................................................................................................... 4 Before Starting Precautions ...............................
Table of Contents Options Accessories .................................................................................................................................. 39 ■ Components ....................................................................................... 39 ■ Automatic Document Feeder .............................................................. 40 Problem Solving Problem Solving .............................................................................................................
Precautions For Your Safety ■ Laser Safety Before Starting LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. ■ Caution Label (Digital copier with ADF option) 7 P06-07_1810_2010_GAP(gbr).
Precautions Handling ■ Do not look directly at the exposure lamp when copying. ■ Do not turn the power switch Off or open the front panel during copying. C Do not drop paper clips or other metal objects into the copier. Toner and Paper ■ Store toner, drum and paper in cool areas with low humidity. C Use high quality 60 - 90 g/m2 (Sheet Bypass: 56 - 128 g/m2) paper. C For optimum performance, it is recommended that only Panasonic Brand supplies are used in the copier.
Precautions Installation ■ The maximum power consumption is 1.2 kW. Before Starting A properly wired (grounded), dedicated, 6A, 220-240 V AC outlet is required. Do not use an extension cord. The power cord on this equipment must be used to disconnect the main power. Please ensure that the socket outlet is installed near the equipment and is easily accessible. FOR YOUR SAFETY Caution Note: Disconnect from the mains supply before removing covers.
Control Panel (For DP-2010E only) No Contents Refer to 2 in 1 Key C From two 1-sided originals, side by side, to 1-sided copies. 2 Page Copy Key C Copying two facing pages on a A3 size original on two separate A4 size sheets. Sort Key C When using Electric Sorting Mode. Optional memory is required. # $ % Page 17 Page 23 & MARGIN Key C Shifts the image to the right or left. ( EDGE Key C Creates a blank edge. Page 18 ) BOOK Key C Eliminates dark inner binding shadows.
Control Panel Before Starting LCD Display Warning Indications J Add Paper ? Add Toner I Misfeed 2 Call Service For DP-1510P/1810P No Contents Refer to 2 STOP Key C Stops the copy run. —— 3 START Key C Used to start an operation. —— 4 INTERRUPT Key, MEMORY IN Key, M1/M2 Keys C Interrupt Key interrupts other copy jobs while making copies. C Memory In Key registers two copy jobs for recall at a later time. C M1/M2 Keys are used to store a Job in Memory or to recall a Job stores in Memory.
Basic Copy Full Size Copying ■ Copying the Same Size Originals (1:1) Copy size is automatically selected. ORIGINAL SIZE Key CLEAR Key 1 2 3 Number of Copies* Press START** Up to 999 Place the Original LCD Display (Sample) READY TO COPY COPIES:001 Select the Original Size on units without the ADF/i-ADF Option. ■ Manually Selecting Exposure Control or Original Type # Select the Original Type PHOTO : Originals are mainly composed of photo. TEXT/PHOTO: Combined originals with text and photo.
Basic Copy Reduction or Enlargement Copying ■ Copying with Preset Ratios 2 Select the ORIGINAL SIZE 3 Select the COPY SIZE 4 5 Number of Copies Example: Reduction Original size Making Copies 1 Place the Original RESET Press START Copy size A3 A4 A3 ->A4B [A4B ] ZOOM: 71% COPIES:001 The correct ratio is automatically selected.
Basic Copy Zoom Copying ■ Zoom Copies with variable zoom ratios from 50 % to 200 % in 1 % increments. 1 Place the Original 2 3 Select ORIGINAL SIZE (without using ADF/i-ADF) Press Cursor (G or F) keys to select Zoom Ratio RESET 4 5 Number of Copies Press START B A4 ->A4B [A4B ] ZOOM:125% COPIES:001 (Example: 125 % Zoom) ATTENTION C When changing the paper size after setting the zoom ratio, please use the paper tray key. C Press the RESET key to cancel all job settings.
Basic Copy Using the Sheet Bypass ■ Copying on Special Paper, etc. 1 Place the original. Open the sheet bypass. Sheet Bypass 3 # Place the sheets of paper into the tray. (approximately up to g m2) 50 A4 size sheets 80 /g Making Copies 2 Pull out the sheet bypass tray until it stops. (For A3 size only) Do not fill above. Side Guides Insert the paper until it stops. $ Adjust the side guides. Incorrect adjustment may cause the paper to wrinkle, misfeed or skew. Press START.
Creative Features 2 in 1 Copy ■ 2 in 1 Copy From two 1-Sided originals, side by side, to 1-Sided pages. 1 \ 2 (Layout)* 1 \ 2 (Layout)* 2 \ 1 (Layout)* 2 \ 1 (Layout)* Landscape (Orientation)* Portrait (Orientation)* ■ Procedure ADF/i-ADF Face-Up 1 Place the Originals 2 Press 2 in 1 key (3 ) COPY SIZE (Reduction/ Enlargement Only) Number of Copies C The ADF/i-ADF is required for 2 in 1 copy. CPress the RESET key to cancel all job settings.
Creative Features 2 PAGE COPY ■ 2 PAGE Copy Copying two facing pages on a A3 size original on two separate A4 size sheets. Making Copies ■ Procedure 1 2 Place the Press the 2 Originals PAGE COPY key Platen 3 4 5 ORIGINAL SIZE (A4 or A3 size Only) Number of Copies Press START A3 size original Book Mark Centre book by length and width according to centre marks. A4 NOTE C To reset all job settings, press the RESET key. 17 P16-17_1810_2010_GAP(gbr).
Creative Features BOOK/EDGE/MARGIN ■ BOOK Key Eliminates dark inner binding shadows when copying from a book. ■ EDGE Key Creates a blank edge. ■ MARGIN Key Shifts the image to the right or left. ■ Procedure 3 2 1 Place the Original Press Cursor (G or F) keys to adjust the void width while the button is blinking. (approx. 5 sec.
Creative Features 2-Sided/1-Sided Copy (For DP-2010E) ■ Key Operation Press 2-Sided/1-Sided Copy key (circulation) to select a 2-Sided/1-Sided Copy function. 1\2 From 1-Sided originals to 2-Sided copies. (See page 20) 2\2 From 2-Sided originals to 2-Sided copies. (See page 20) From book originals to 2-Sided copies. (See page 21) From 2-Sided originals to 1-Sided copies.
Creative Features 1 \ 2 / 2 \ 1 / 2 \ 2 Copy (For DP-2010E) ■ 1 \ 2 Copy ■ 2 \ 1 Copy From 1-Sided originals to 2-Sided copies. (From Copier Platen & i-ADF/ ADF) ■ 2 \ 2 Copy From 2-Sided originals to 1-Sided copies. (Using i-ADF) From 2-Sided originals to 2-Sided copies.
Creative Features Book \ 2 Copy (For DP-2010E) ■ Book \ 2 Copy From book originals to 2-Sided copies. A3 size originals only. Flipping (Book Format)* Making Copies Facing (Book Format)* 1 2 Place the Original on the Platen Platen (3 ) Press 2-Sided/ 1-Sided Copy key (circulation) to select Book \ 2 A3 size original Book Mark COPY SIZE (Reduction/ Enlargement Only*) 4 5 Number of Copies Press START A3 Centre book by length and width according to centre marks.
Creative Features Job Memory ■ Two Copy Jobs Can Be Programmed in Memory (M1, M2) for recall at a later time. To Store a Job in Memory # Set up the copy job to be stored in memory, by first selecting each function you wish the copier to perform. JOB MEMORY PRESS M1,M2 TO STORE. $ Press the MEMORY IN (F2) key. % Press the M1 (F3) or M2 (F4) key. To Recall a Job Stored in Memory & Place the Original RECALL JOB MEMORY LOADING... ( Press the M1 (F3) or M2 (F4) key. The stored contents will be displayed.
Creative Features Sort Copy ■ Sort Copy The sort copy has 2 available electronic sorting functions as follows: Note: Before using the sort copy, select the desired sorting mode by setting its function first (See page 29). Sort Sort-Rotate Multiple copies sorted automatically. 1 1 1 Multiple copies sorted automatically and Stacked in alternate direction.
Other Features Energy Saver/Interrupt Mode INTERRUPT (F1) Key ENERGY SAVER ENERGY-SAVER Key ■ These modes can save power while the copier is not in use. Energy Saver Mode # To enter this mode Press the ENERGY-SAVER key or the copier will automatically enter the ENERGY-SAVER Mode after 15 minutes* from the last copy. The indicator will flash. $ To cancel this mode and make copies Press the ENERGY-SAVER key again. Sleep Mode # Automatically enters the Sleep Mode after 30 minutes from the last copy.
Other Features Skyshot Mode ■ Skyshot allows copying a manuscript without generating dark borders even if the platen cover or ADF/i-ADF is opened. Skyshot mode eliminates dark borders around the originals, and is especially convenient for copying small-sized originals like bank checks or documents with unusual shapes (round, oval, etc.). These documents can be reproduced without generating any unnecessary black areas simply by making a copy with the cover open.
Other Features Skyshot Mode ■ Manual Skyshot Mode When using this function, the custom size should be registered into memory (M1, M2) in advance. (See page 32) Platen Upperleft corner 1 2 Place the Original Select the Custom Size (M1 or M2) 3 4 Number of Copies Press START # Press the FUNCTION key. 2 FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧ 2:COPIER SETTINGS PRESS SET TO SELECT COPIER PARAM. (00-14) ENTER NO._ OR ∨ ∧ 07 MANUAL SKYSHOT 1:OFF $ Press the 2 key to select COPIER SETTINGS.
Combined Function Table Book Edge Margin Non-Sort Sort Sort-Rotate Manual Skyshot Job Memory Retrieval Job Memory Storing O O O O A A O 2 in 1 Copy O A A O A A A O O O O O O A A O 2 Page Copy O A A A A A A O O O O O O A A O 1\2 O O A A A A A O O O O O O A A O 2\2 O O A A A A A O O O O O O A A O Book \ 2 O O A A A A A O O O O O O A A O 2\1 O O A A A A A O O O O O O A A O Book O O O O O O O A O O O O O A A O Edge O
Function ■ Using Function Modes to Change the Initial Copy Modes Options General Functions Copier Settings LAN Settings Printer Settings Input Identification Code General Functions for Key Operator Copier Settings for Key Operator ■ Procedure LAN Settings for Key Operator Printer Settings for Key Operator FUNCTION Key RESET Key COPY SIZE PAPER Key TRAY Key FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧ # Press the FUNCTION Key $ Press 1 (GENERAL FUNCTIONS) or 2 (COPIER SETTINGS) key.
Function General Functions No. Modes Function Initial Setting SORT MODE DEFAULT Selects the sort mode. NON-SORT C NON-SORT, SORT (For DP-1810P/2010E) 05 SORT MEMORY USAGE Displays the amount of sort memory used on the panel. C OFF, DISPLAY (For DP-1810P/2010E) OFF 06 DEPT. COUNTER Copy usage and copy limit of the selected department and total copy usage will appear on the screen. 08 SORT-ROTATE DEFAULT Select Sort-Rotate mode. C OFF, ON (For DP-1810P/2010E) Consult your service technician.
Function Copier Settings No. Modes 00 MARGIN DEFAULT Selects the margin position and shift value. C POSITION (Left, Right, Top, Bottom) C VALUE (5 - 99 mm) LEFT 10 mm 01 EDGE DEFAULT EQUAL RATE 5 mm 02 BOOK MARGIN DEF. Selects the edge mode (Equal Rate = set the same value for X & Y or Individual = set the value for X & Y individually) and width. C EQUAL RATE (X & Y ), INDIVIDUAL C 5 - 99 mm Selects the book Centre Void margin width.
Function General Functions for Key Operator No. Modes Function Sets the paper size of each paper tray. C Tray-1, Tray-2, Tray-3, Tray-4 Selects the Control Panel reset time. C OFF, 30 sec, 1 min., 2 min., 3 min., 4 min. Sets the Energy Saver mode and time. C INVALID, ENERGY-SAVER, SLEEP Energy save mode timer : 1-120 minutes Sleep mode timer : 1-120 minutes Initial Setting Consult your service technician. 1 min.
Function Copier Settings for Key Operator No. Modes 01 ORIGINAL (HOME) 02 TEXT CONTRAST 03 T/P CONTRAST 04 PHOTO CONTRAST 10 MAX. COPY SETTING 12 M1, SIZE 13 M2, SIZE Input a size in memory 2 for frequent usage size. C X: 5~432/Y: 5~297 mm (See page 22) 16 MEM.
Function Function Setting ■ Changing the Auto Exposure Setting You can select whether the copying density is adjusted automatically for text and photographic originals. 2 Proceed as Follows: FUNCTION Key FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧ # Press the 2 key to select COPIER SETTINGS. 2:COPIER SETTINGS PRESS SET TO SELECT $ Press the SET key. COPIER PARAM. (00-14) ENTER NO._ OR ∨ ∧ 08 AUTO EXPOSURE 2:VALID Making Copies 1 Press the FUNCTION key.
Function Function Setting for Key Operator ■ Changing the Paper Size The Paper Trays are designed to accommodate A5, A4, A4 R, FLS/B4 and A3 size paper. To change the paper size, perform the steps shown below. 1 Press the FUNCTION key. 2 Proceed as Follows: FUNCTION Key FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧ # Press the 1 key to select GENERAL FUNCTIONS. 1:GENERAL FUNCTIONS PRESS SET TO SELECT $ Press the SET key. GENERAL PARAM. (0-9) ENTER NO.
Function Function Setting for Key Operator 3 Changing the Paper Guide and Paper Size Indicator in the Paper Tray # Pull the Paper Tray out and remove paper. Paper Guide a Stopper Paper Guide b Making Copies $ Adjust the paper guide a to the required paper length. % Adjust the Paper Guide b to the required paper width. Pinch the stopper to move the Paper Guide b. & Change the Paper Size Indicator. Size Indicator ( Close the Paper Tray.
Function Function Setting for Key Operator ■ Department Counter The Key Operator can manage, limit copies, counters and code numbers for each department. (Maximum department counters: 50) 1 Press the FUNCTION key. 2 Proceed as Follows: FUNCTION Key FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧ # Press the 1 key to select GENERAL FUNCTIONS. 1:GENERAL FUNCTIONS PRESS SET TO SELECT $ Press the SET key. GENERAL PARAM. (0-9) ENTER NO._ OR ∨ ∧ & Press the Key Operator ID code (3 digit) and SET key. KEY OPR.
Function Function Setting for Key Operator 3 Select the Department Counter Mode. DEPT.COUNTER MODE 1:TOTAL COUNTER DEPT. CODE (01-50) ENTER NO. OR ∨ ∧ Change the Department ID Code, limit the maximum number of copies and Department Counter number. ID CODE 01:1234 Making Copies 4 Press 2 and the SET key. # Press the Keypad and the SET key to input the Department ID Code. 01: 1234 Department ID Code Department No.
P38_1810_2010_GAP(gbr).
Accessories Components i-ADF (Inverting Automatic Document Feeder) (DA-AR201) C Feeds original automatically C Duplexing C 2:1 Copy C 2 in 1 Copy DP-1810P with Options DP-2010E with Options Image Memory (DA-SM08B/SM16B/SM64B/SM28B) C 8/16/64/128 MB C To increase the memory capacity for electronic sorting and sort printing. DP-1510P/1810P (For DP-1810P/2010E) C To increase the memory capacity for sort printing.
Accessories Automatic Document Feeder ■ ADF (DA-AS180) / i-ADF (DA-AR201) 1. Features # Automatic Original Feeding C The ADF/i-ADF tray can hold up to 50 A4 size originals of 80 g/m2 paper (up to 30 FLS/B4 or A3 size originals). It can accommodate from A5 to A3 size originals. C Automatic original size detection. $ 2 in 1 Copy C To make a 1-Sided copy (full size or reduction), from two 1-Sided originals side-by-side.
Accessories 3.
Problem Solving J) Adding Paper (J ■ 550-Sheet Paper Tray 1 Pull the Paper Tray out. 2 Place the paper with the copying surface facing upward. 3 Make sure paper is not loaded above the overfill indicator located in the Paper Tray. 4 Firmly push the Paper Tray back into the copier. ATTENTION Special papers, like glossy paper, mailing labels and transparencies cannot be used in the paper tray. Use the Sheet Bypass for special paper. C Do not use paper with folds or wrinkles.
Problem Solving/U13 ?) Adding the Toner and Replacing Waste Toner Container (? 1 Open the Front Cover. 2 Remove the Waste Toner Container by slowly pulling it towards the left as illustrated. 3 Seal the container with the enclosed cap and dispose of it properly. Cap 4 1 2 # Turn the empty Toner Bottle counter-clockwise until it stops. The Arrow mark (Unlocked symbol ) visible on the end of the Toner Bottle is aligned with the Arrow mark on the machine.
Problem Solving ?) Adding the Toner and Replacing Waste Toner Container (? 5 # Shake the new Toner Bottle four or five times to loosen the contents. 2 1 $ Remove the cap from the Toner Bottle. 6 1 2 2-1 2-3 Incorrect Correct 2-2 # Align the Key of the bottle, also represented by the Arrow mark (Unlocked symbol ) visible on the end of the Toner Bottle with the Arrow mark on the machine. Note: To prevent toner spill, ensure that the key is facing upwards before installing the bottle.
Problem Solving Removing a Misfed Paper ■ Paper Misfeed Indicators and Locations When a paper misfeed occurs, the misfeed indicator and the misfeed location(s) will be displayed on the panel display.
Problem Solving Removing a Misfed Paper ■ Paper Exit Area C Make sure that the misfeed indicator goes off after removing all misfed paper. For DP-1510P/1810P 1 ATTENTION For DP-2010E Remove the misfed paper. C Make sure that the misfeed indicator goes off after removing all misfed paper. 46 P45-46_1810_2010_GAP(gbr).
Problem Solving ■ Paper Entry/Transport Area C Make sure that the misfeed indicator goes off after removing all misfed paper. For DP-1510P/1810P For DP-2010E 1 Open the Right Cover. 2 Remove the misfed paper. 3 If copy paper is fed far into the copier: # Turn the right paper clearing knob. $ Remove the misfed paper. 4 # Open the Heat Roller Cover. $ Remove the misfed paper. % Close the Right Cover. Caution heated surface Caution: This fuser area may be hot.
Problem Solving Removing a Misfed Paper ■ ADU Area (For DP-2010E only) C Make sure that the misfeed indicator goes off after removing all misfed paper. 1 Open the Right Cover. 2 Remove the misfed paper. 3 If copy paper is fed far into the copier; # Turn the right paper clearing knob. $ Remove the misfed paper. 4 Close the Right Cover. 48 P47-48_1810_2010_GAP(gbr).
Problem Solving ■ Paper Feed Module C Make sure that the misfeed indicator goes off after removing all misfed paper. For DP-1510P/1810P For DP-2010E 1 # Pull the paper tray out. $ Remove the misfed paper. % Return the Paper Tray to the original position. 2 # Open the Feed Cover. $ Remove the misfed paper. % Close the Feed Cover. I ATTENTION C Make sure that the misfeed indicator goes off after removing all misfed paper. 49 P49_1810_2010_GAP(gbr).
Problem Solving Removing a Misfed Paper ■ i-ADF (For DP-2010E only) C Make sure that the misfeed indicator goes off after removing all misfed paper. 1 # Open the Entry Cover. $ Remove the misfed paper. % Close the Entry Cover. 2 # Open the ADF Cover. $ Remove the misfed paper. % Close the ADF Cover. & Open and close the Entry Cover to reset the error. 3 # Lift up the ADF Input Tray. $ Open the ADF exit cover. % Remove the misfed paper. & Close the ADF exit cover. ( Close the ADF Input Tray.
Problem Solving ■ ADF C Make sure that the misfeed indicator goes off after removing all misfed paper. For DP-1510P/1810P 1 # Open the Entry Cover. $ Remove the misfed paper. % Close the Entry Cover. 2 # Open the ADF Cover. Note: To prevent damaging the originals, open the ADF Cover before removing the misfed original(s). $ Remove the misfed paper. % Close the ADF Cover. & Close the ADF.
Troubleshooting Before Calling Service Action Check Unit Does Not Operate Check if the Power Switch is turned On and that the power cord is connected into the outlet. Does the display light? (No) Does the Energy Saver key flash (or light) and displays are turned OFF? (See page 24) (No) Does any of the U## codes and messages appear on the display? (U01, U07, U13, U14, U20 and U21) (See page 54) (Yes) Press Energy Saver key on the Control Panel. (Yes) Perform actions in accordance with each message.
Troubleshooting 2. The Toner Charging Mode starts and the LCD displays: CHARGING TONER Add Toner Warning Indicator: C Flashing = Toner Bottle is nearly empty C Lit = Toner Bottle is empty 3. This message is displayed for approximately 200 seconds. CHARGING TONER ❚❚❚❚❚ ∗ Each “ ❚ ” is approximately 10 sec. 4. This massage will continue to be displayed until the warm-up cycle is completed, and if the toner bottle was replaced. Upon completion, the Add Toner Warning Indicator automatically turns Off.
Troubleshooting User Error Codes (U Code) The self-diagnostic functions detect troubles in the important components of the copier. When any trouble occurs, the copier stops. Code U01 U07 U13 Display Message CLOSE FRONT/RT COVER CLOSE FEED COVER TONER IS RUNNING LOW NO WASTE TONER BOX U14 WASTE TONER BOX IS FULL U20 CLOSE ADF COVER U21 CLOSE PLATEN COVER Check Points Front Cover is open. Feed Cover is open. 1. Toner Cartridge is incorrectly installed. 2. Low Toner or No Toner Waste Container. 1.
Specifications ■ DP-1510P/1810P/2010E (Copier) Type Desktop Platen Type Fixed Acceptable Originals Sheets, Books (max. A3) Copying Method Laser Electrophotography Fixing Method Heat Roller Fixing Imaging Method Dry-Type Single component imaging Resolution Max. 600 dpi Maximum Copy Size A3 Void Area Max. 5 mm Warm Up Time Approx. 30 seconds (20°C) First Copy Time Approx. 6.
Specifications ■ ADF (DA-AS180) DA-AS180 Tray Capacity A4, A5: 50 sheets (70 g/m2) FLS/B4, A3: 30 sheets (70 g/m2) Paper Size A5/A4/FLS/B4/A3 Paper Weight 50 – 110 g/m2 Electrical Requirements Supplied from the copier Dimensions (W × D × H) 558 × 501 × 112 mm Weight 5.
Options and Supplies ■ The DP-1510P/1810P/2010E is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabilities will make your office-place more productive and efficient. ■ Options Part Name Part No.
P58-59_1810_2010_GAP(gbr).
P58-59_1810_2010_GAP(gbr).
For Service, Call: Matsushita Electric Industrial Co., Ltd.
