Datasheet

DP-11-E-P-J
DIGITAL PRESSURE SENSOR
A new M8 connector-type
added to the DP-100 series!
M8 connector type
M8 connector
G
1
/8 male thread
M5 female thread
R
1
/8 male thread
M5 female thread
Connection cable
CN-24A-C2 (cable length 2 m 6.562 ft)
CN-24A-C5 (cable length 5 m 16.404 ft)
Standard type
Conforming to
EMC Directive
Connection cable
The dual display means that the ‘current value’ and the ‘threshold value’ can be displayed at the same time to improve ease of operation and
visual checking.
Introducing a new standard in digital pressure sensor technology.
The current value and the
threshold value can both be
checked at the same time. You
can check and change the
threshold value directly, without
having to switch screens.
The main display changes color in the status of output ON /
OFF operation, and it also changes during setting. This makes
it easy to see the status of the sensor and reduces operation
errors.
Dual 3-color display makes operation easier!
DP-100 with dual display
Previous model with single display
Dual display allows direct setting of threshold value 3-color LCD display (Red, Green, Orange)
Note
current value
Current
value
Operate
MODE key
Adjust
threshold
value
Return to
RUN
operation
Press the button directly.
Man-hours
reduced by
Man-hours
reduced by
3
/
4
3
/
4
Threshold
value
SET: OrangeOFF: Green (or Red) ON: Red (or Green)
During normal operation During setting
Sub display
The cable can be connected by
M8 connection
In addition to the standard sensors which have flat-type plastic
connectors, the line-up now includes sensors with M8
connectors that can be connected using metal M8 threads.
Dual
3-color
display
10/2006