Digital Color Imaging Systems Operating Instructions

8
Chapter 1 Basic Menu Features
Basic Operation Procedure
The machine automatically detects original(s) and decides on the Copy Size and Color mode to use. If
the detection fails, manually set the settings.
1 Place original(s).
z Refer to Placing Originals (see page 6).
2 Press the Copy key if the machine is
set to other function mode.
3 Select the required settings if
necessary.
z The original size is detected and a
corresponding Copy Size is automatically
selected.
z When the desired size of paper is not set in
the Paper Trays, use the Sheet Bypass. For
using the Sheet Bypass, refer to Adding
Paper <Printing Media> in the Operating
Instructions (For Maintenance) of provided
CD-ROM.
z The original’s color is detected and the
corresponding color mode is selected
automatically.
z If the orientation of original does not match
the orientation of copy paper, the image of
original is rotated automatically and copied.
z When copying 8.5" x 11" size originals,
selecting 8.5" x 11" for the Copy Size
accelerates the continuous copying speed.
If the orientation is not the same for both
settings, the copied image is automatically
rotated by 90 degrees.
z For more details of the Basic Menu screen,
refer to Basic Menu Features (see pages
10 to 40).
z When setting other features, refer to More
Menus Features (see pages 42 to 102).
Ex: 2-Sided Copy, Sort / Finish, Zoom/
Effects, etc.
Face up. Up to 100 sheets (20 lb/
Letter)
Face down. Align with top left
corner. Close ADF.