Printer/Fax/Scanner/Copier Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Basic Menu Features
- Basic Operation Procedure
- Selecting the Color Mode
- Selecting Original Type and Adjusting the Density
- Registering Quality Preset
- Using Quality Preset
- Quality Adjusting
- Proof Copying
- Confirming/Editing the Selected Copy Features
- Storing a Job in Memory
- Recalling a Preset Job Stored in Memory
- Checking the Waiting to Copy Job
- Completion Notice
- More Menus Features
- 2-Sided Copy Mode
- Basic Operation for the 2-Sided Copy Mode
- Copying 2-Sided Original(s) onto Two Separate Sheets
- Copying Facing Page Original to Two Separate Sheets
- From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch (Booklet)
- Copying Mixed Size Originals from the ADF
- Copying Special Originals (Thin Paper, etc.) from the ADF
- Sort Mode
- Zoom Mode
- Effect Modes
- Insertion Modes
- Overlay Modes
- 2-Sided Copy Mode
- Other Features
- Appendix
91
Chapter 3 Other Features
Manual Skyshot Mode
The original can be copied with the pre-registered scan size in memory.
z Before using the Manual Skyshot mode, set M1 or M2 in the preset jobs. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) of provided CD-ROM.
z Originals with black borders may not be copied properly.
z If the Manual Skyshot mode is selected in “Sort”, “Shift-Sort”, “Rotate-Sort”, “Staple-Sort”, “Shift-Group” or
“Rotate-Group”, the setting is automatically changed to “Non Sort”.
1
Open the ADF more than 45 degrees,
and place original on the Platen Glass,
and then leave the ADF open.
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select copy features if necessary.
4
Select “Preset Jobs” on the Basic
Menu screen.
5
Select the Original Size from either
“M1:” or “M2:”.
6
Enter the desired number of copies.
7
Press the Start key.
z Place the next original, and then follow the
instructions described on the Touch Panel
Display.
z After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.