Printer/Fax/Scanner/Copier Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Basic Menu Features
- Basic Operation Procedure
- Selecting the Color Mode
- Selecting Original Type and Adjusting the Density
- Registering Quality Preset
- Using Quality Preset
- Quality Adjusting
- Proof Copying
- Confirming/Editing the Selected Copy Features
- Storing a Job in Memory
- Recalling a Preset Job Stored in Memory
- Checking the Waiting to Copy Job
- Completion Notice
- More Menus Features
- 2-Sided Copy Mode
- Basic Operation for the 2-Sided Copy Mode
- Copying 2-Sided Original(s) onto Two Separate Sheets
- Copying Facing Page Original to Two Separate Sheets
- From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch (Booklet)
- Copying Mixed Size Originals from the ADF
- Copying Special Originals (Thin Paper, etc.) from the ADF
- Sort Mode
- Zoom Mode
- Effect Modes
- Insertion Modes
- Overlay Modes
- 2-Sided Copy Mode
- Other Features
- Appendix
75
Chapter 2 More Menus Features
5
Select the Front, or Front and Back
covers.
6
Select “Cover” until the desired Paper
Tray is displayed.
z When changing paper for copies other than
the cover page, select “Copy”, and change
the Paper Tray.
z When using color or Special paper for the
cover page, place the paper in the Sheet
Bypass or any tray beforehand, and also
select the type of paper that you will use. If
the type of paper is not selected properly,
the quality of the image may become poor.
Refer to the Operating Instructions (For
Basic Operations) of provided booklet.
7
Select “OK”.
8
Enter the desired number of copies.
9
Press the Start key.
z After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.
Front
Blank
Select to add a Blank
Front cover.
Front
Copy
Select to add a copied
Front cover.
Front+Back
Blank
Select to add a Blank
Front and Back cover.
Front+Back
Copy
Select to add a copied
Front and Back cover.