Printer/Fax/Scanner/Copier Operating Instructions

72
Chapter 2 More Menus Features
Image Repeat
Create multiple images on a sheet from a single original.
z Dotted lines can be printed between each of the copied images. Refer to Copier Settings in the Operating
Instructions (For Function Parameters) of provided CD-ROM.
z This function can be selected when the original is placed on the Platen Glass.
z As the original is placed on the Platen Glass, the position of the original may be erroneously detected if
influenced by ambient light.
z If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
1 Open the ADF more than 45 degrees,
and place original on the Platen Glass,
and then leave the ADF open.
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2 Press the Copy key if the machine is
set to other function mode.
3 Select “More Menus”.
4 Select “Zoom / Effects”, and then
select “Image Repeat”.
5 Select the desired type of paper, and
then select “OK”.
6 Enter the desired number of copies.
7 Press the Start key.
z After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.
The minimum size of the
original is 20 mm x 20 mm.