Printer/Fax/Scanner/Copier Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Basic Menu Features
- Basic Operation Procedure
- Selecting the Color Mode
- Selecting Original Type and Adjusting the Density
- Registering Quality Preset
- Using Quality Preset
- Quality Adjusting
- Proof Copying
- Confirming/Editing the Selected Copy Features
- Storing a Job in Memory
- Recalling a Preset Job Stored in Memory
- Checking the Waiting to Copy Job
- Completion Notice
- More Menus Features
- 2-Sided Copy Mode
- Basic Operation for the 2-Sided Copy Mode
- Copying 2-Sided Original(s) onto Two Separate Sheets
- Copying Facing Page Original to Two Separate Sheets
- From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch (Booklet)
- Copying Mixed Size Originals from the ADF
- Copying Special Originals (Thin Paper, etc.) from the ADF
- Sort Mode
- Zoom Mode
- Effect Modes
- Insertion Modes
- Overlay Modes
- 2-Sided Copy Mode
- Other Features
- Appendix
67
Chapter 2 More Menus Features
Date
The original can be copied with a date printed. The date is printed in the MM/DD/YYYY format.
1
Select “Date”.
z To display this screen, refer to steps 1 to 4 of
Basic Operation for Stamping (see page
62).
2
Select the Orientation of the original.
3
Select the Stamp Position.
4
To change the date, follow the steps
below.
Select “Change”.
The cursor is displayed.
12/01/2007
12/01/2007
Select the orientation of the
original according to the orientation
of its characters (vertical direction).
Select the orientation of the
original according to the orientation
of its characters (horizontal
direction).
The date is printed on the bottom
at the center.
The date is printed on the bottom
right side.
The date is printed on the upper
right side.
Continued on the next page...