Printer/Fax/Scanner/Copier Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Basic Menu Features
- Basic Operation Procedure
- Selecting the Color Mode
- Selecting Original Type and Adjusting the Density
- Registering Quality Preset
- Using Quality Preset
- Quality Adjusting
- Proof Copying
- Confirming/Editing the Selected Copy Features
- Storing a Job in Memory
- Recalling a Preset Job Stored in Memory
- Checking the Waiting to Copy Job
- Completion Notice
- More Menus Features
- 2-Sided Copy Mode
- Basic Operation for the 2-Sided Copy Mode
- Copying 2-Sided Original(s) onto Two Separate Sheets
- Copying Facing Page Original to Two Separate Sheets
- From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch (Booklet)
- Copying Mixed Size Originals from the ADF
- Copying Special Originals (Thin Paper, etc.) from the ADF
- Sort Mode
- Zoom Mode
- Effect Modes
- Insertion Modes
- Overlay Modes
- 2-Sided Copy Mode
- Other Features
- Appendix
63
Chapter 2 More Menus Features
Continued on the next page...
Page Number
The original can be copied with page numbers printed.
z The default is -n- (number) format. To change to n/m (number/maximum) format, refer to Copier Settings in
the Operating Instructions (For Function Parameters) of provided CD-ROM.
z Make sure to select “Sort”.
1
Select “Page Number”.
z To display this screen, refer to steps 1 to 4 of
Basic Operation for Stamping (see page
62).
2
Select the Orientation of the original.
3
Select the Stamp Position.
4
To change the start page and start
number, select “Change”.
Select the orientation of the
original according to the
orientation of its characters
(vertical direction).
Select the orientation of the
original according to the
orientation of its characters
(horizontal direction).
The page number is printed on the
bottom at the center.
The page number is printed on the
bottom right side.
The page number is printed on the
upper right side.