Printer/Fax/Scanner/Copier Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Basic Menu Features
- Basic Operation Procedure
- Selecting the Color Mode
- Selecting Original Type and Adjusting the Density
- Registering Quality Preset
- Using Quality Preset
- Quality Adjusting
- Proof Copying
- Confirming/Editing the Selected Copy Features
- Storing a Job in Memory
- Recalling a Preset Job Stored in Memory
- Checking the Waiting to Copy Job
- Completion Notice
- More Menus Features
- 2-Sided Copy Mode
- Basic Operation for the 2-Sided Copy Mode
- Copying 2-Sided Original(s) onto Two Separate Sheets
- Copying Facing Page Original to Two Separate Sheets
- From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch (Booklet)
- Copying Mixed Size Originals from the ADF
- Copying Special Originals (Thin Paper, etc.) from the ADF
- Sort Mode
- Zoom Mode
- Effect Modes
- Insertion Modes
- Overlay Modes
- 2-Sided Copy Mode
- Other Features
- Appendix
51
Chapter 2 More Menus Features
When the optional 1Bin Saddle-Stitch
Finisher is installed.
Select the Staple position.
When the optional Punch Unit is installed
to the 1Bin Saddle-Stitch Finisher.
Select the Punch position.
When the optional 1Bin Finisher is
installed.
Select the Staple position.
5
Enter the desired number of copies.
6
Press the Start key.
z When copying from the Platen Glass, place
the next original and follow the instructions
described on the Touch Panel Display.
z After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.
2 positions on the left side
1 position on the upper left side
2 positions on the upper side
2 positions on the right side
1 position on the upper right side
1 position on the upper left
side
1 position on the upper
right side