Printer/Fax/Scanner/Copier Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Basic Menu Features
- Basic Operation Procedure
- Selecting the Color Mode
- Selecting Original Type and Adjusting the Density
- Registering Quality Preset
- Using Quality Preset
- Quality Adjusting
- Proof Copying
- Confirming/Editing the Selected Copy Features
- Storing a Job in Memory
- Recalling a Preset Job Stored in Memory
- Checking the Waiting to Copy Job
- Completion Notice
- More Menus Features
- 2-Sided Copy Mode
- Basic Operation for the 2-Sided Copy Mode
- Copying 2-Sided Original(s) onto Two Separate Sheets
- Copying Facing Page Original to Two Separate Sheets
- From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch (Booklet)
- Copying Mixed Size Originals from the ADF
- Copying Special Originals (Thin Paper, etc.) from the ADF
- Sort Mode
- Zoom Mode
- Effect Modes
- Insertion Modes
- Overlay Modes
- 2-Sided Copy Mode
- Other Features
- Appendix
44
Chapter 2 More Menus Features
Select the cover type.
z When “Blank” is selected for the cover type,
up to 56 originals can be placed on the ADF.
Select “Cover” to select a paper.
z When changing paper for copies other than
the cover, select “Copy”. If the paper of
desired size is available on the tray, the
display changes.
Select a paper size from the display.
4
Select “OK” to exit the cover settings.
5
Select “OK”.
z For the following procedure, refer to steps 5
to 6 of Basic Operation for the 2-Sided
Copy Mode (see page 40).
z When the fold position does not match with
the center position of the copies, set the
binding margin. Refer to General Settings
in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
z The stapled copies are delivered to the
Saddle Tray of the 1Bin Saddle-Stitch
Finisher as shown below.
Blank Not copied on the cover.
Copy Copied on the cover.
Staple Position
Saddle Tray