Printer/Fax/Scanner/Copier Operating Instructions

40
Chapter 2 More Menus Features
Chapter 2
More Menus Features
2-Sided Copy Mode
z For information on “1 -> 2”, “2 -> 2”, “Book -> 2”, and “N in 1”, refer to the Operating Instructions (For Basic
Operations) of provided booklet.
z The standard setting of “2-Sided / Original->Copy” can be changed. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) of provided CD-ROM.
z Special papers such as cardboard cannot be used for the 2-Sided copy.
Basic Operation for the 2-Sided Copy Mode
1 Place original(s).
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
z For “2 -> 1”, “2 -> 2”, “Booklet”, “Multi-Size
Feed”, and “Job Build and SADF”, place
originals on the ADF.
2 Press the Copy key if the machine is
set to other function mode.
3 Select “More Menus”.
4 Select the desired 2-Sided mode.
1 -> 1 : Clears the 2-Sided copy mode.
2 -> 1 : (see page 41)
2 Page : (see page 42)
Booklet : (see page 43)
Multi-Size Feed: (see page 45)
Job Build and SADF: (see pages 47 to 48)
z When “Multi-Size Feed” is selected, only
“1 -> 1” can be selected.
For N in 1, 1 -> 2, 2 -> 2, and Book -> 2
Modes
z Refer to the Operating Instructions (For
Basic Operations) of provided booklet.
5 Enter the desired number of copies.
6 Press the Start key.
z When copying from the Platen Glass, place
the next original, and follow the instructions
described on the Touch Panel Display.
z After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.