Printer/Fax/Scanner/Copier Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Basic Menu Features
- Basic Operation Procedure
- Selecting the Color Mode
- Selecting Original Type and Adjusting the Density
- Registering Quality Preset
- Using Quality Preset
- Quality Adjusting
- Proof Copying
- Confirming/Editing the Selected Copy Features
- Storing a Job in Memory
- Recalling a Preset Job Stored in Memory
- Checking the Waiting to Copy Job
- Completion Notice
- More Menus Features
- 2-Sided Copy Mode
- Basic Operation for the 2-Sided Copy Mode
- Copying 2-Sided Original(s) onto Two Separate Sheets
- Copying Facing Page Original to Two Separate Sheets
- From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch (Booklet)
- Copying Mixed Size Originals from the ADF
- Copying Special Originals (Thin Paper, etc.) from the ADF
- Sort Mode
- Zoom Mode
- Effect Modes
- Insertion Modes
- Overlay Modes
- 2-Sided Copy Mode
- Other Features
- Appendix
35
Chapter 1 Basic Menu Features
Recalling a Preset Job Stored in Memory
The specific copy job will be done by recalling the registered preset jobs.
A job called “Double Exposure” is set in M10 as default.
Refer to Double Exposure in the Operating Instructions (For Basic Operations) of provided booklet.
z Refer to Storing a Job in Memory (see page 34).
1
Place original(s).
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select “Preset Jobs”.
4
Select a stored job.
z Job buttons without names, indicate that
jobs are not registered.
z If the Confirmation screen “Ready for M 1
Memory Copy” is displayed, select “Close”.
5
To confirm the job settings, select
“Confirm Settings”, and then select
“Close”.
z To change the setting, refer to Confirming/
Editing the Selected Copy Features (see
page 33).
6
Press the Start key.