Printer/Fax/Scanner/Copier Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Basic Menu Features
- Basic Operation Procedure
- Selecting the Color Mode
- Selecting Original Type and Adjusting the Density
- Registering Quality Preset
- Using Quality Preset
- Quality Adjusting
- Proof Copying
- Confirming/Editing the Selected Copy Features
- Storing a Job in Memory
- Recalling a Preset Job Stored in Memory
- Checking the Waiting to Copy Job
- Completion Notice
- More Menus Features
- 2-Sided Copy Mode
- Basic Operation for the 2-Sided Copy Mode
- Copying 2-Sided Original(s) onto Two Separate Sheets
- Copying Facing Page Original to Two Separate Sheets
- From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch (Booklet)
- Copying Mixed Size Originals from the ADF
- Copying Special Originals (Thin Paper, etc.) from the ADF
- Sort Mode
- Zoom Mode
- Effect Modes
- Insertion Modes
- Overlay Modes
- 2-Sided Copy Mode
- Other Features
- Appendix
29
Chapter 1 Basic Menu Features
Saturation
The original can be copied with the adjusted saturation.
1
Select “Saturation”.
z To display this screen, refer to step 1 of
Background Removal (see page 24).
2
Adjust the saturation with “Lower” or
“Higher”, and then select “OK”.
z The screen will return to step 1.
Select “OK”, and then proceed to steps 6 to
8 of Quality Adjusting (see page 23).
HigherLower
Lower Each time it is selected, the
saturation level decreases by 1
grade lower, reducing the color
saturation.
Higher Each time it is selected, the
saturation level increases by 1
grade higher, increasing the
color saturation.