Printer/Fax/Scanner/Copier Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Basic Menu Features
- Basic Operation Procedure
- Selecting the Color Mode
- Selecting Original Type and Adjusting the Density
- Registering Quality Preset
- Using Quality Preset
- Quality Adjusting
- Proof Copying
- Confirming/Editing the Selected Copy Features
- Storing a Job in Memory
- Recalling a Preset Job Stored in Memory
- Checking the Waiting to Copy Job
- Completion Notice
- More Menus Features
- 2-Sided Copy Mode
- Basic Operation for the 2-Sided Copy Mode
- Copying 2-Sided Original(s) onto Two Separate Sheets
- Copying Facing Page Original to Two Separate Sheets
- From 1-Sided Originals to 2-Sided Copies Using Saddle Stitch (Booklet)
- Copying Mixed Size Originals from the ADF
- Copying Special Originals (Thin Paper, etc.) from the ADF
- Sort Mode
- Zoom Mode
- Effect Modes
- Insertion Modes
- Overlay Modes
- 2-Sided Copy Mode
- Other Features
- Appendix
24
Chapter 1 Basic Menu Features
Background Removal
The original can be copied with the background color removed. This function is useful when copying
newspapers or an original with background color.
z The setting of Background Removal becomes invalid if “Photo” is selected in “Original Type”.
1
Select “Custom Setting”.
z To display this screen, refer to steps 1 to 4 of
Quality Adjusting (see page 22).
2
Select “Background Removal”.
z If “TracingPaper” is selected in “Original
Type”, Background Removal is set to 3.
3
Adjust the level of Background
Removal with “-” and “+”, and then
select “OK”.
4
Select “OK”.
z For the following procedure, refer to steps 6
to 8 of Quality Adjusting (see page 23).
Background
Removal
There are 6 levels. The higher
the value, the more Background
Color removed.