Digital Colour Imaging Systems Operating Instructions
Table Of Contents
- Operating Instructions
- Conventions
- Table of Contents
- Getting To Know Your Machine
- Basic Fax Transmission
- Fax Transmission Procedure
- Entering a Destination
- Transmission with Destination Monitoring
- Talking to the Remote Party Before Transmission
- Setting Original Quality
- Setting the Original Size
- Transmitting 2-Sided Originals
- Verification Stamp
- Transmitting a Document Stored in Memory
- Job Build and SADF
- Direct Transmission
- Verifying Communication Status
- Rotated Transmission
- Batch Transmission
- Getting an Outside Line Using PIN Code Access
- Using Program Keys
- Cancelling a Communication
- Dial Prefix
- Convenient Fax Features
- Fax Reception
- Internet Fax
- What is Internet Fax?
- What Internet Fax Can Do
- Tips for Internet Fax
- Preparing to Use Internet Fax
- Sending an Email Procedure
- Entering an Email Address
- Using Cc, Bcc and From
- Setting a File Type and a File Name
- Emailing an A3-Sized Document
- Setting Message Delivery Notice (MDN)
- When Email Transmission Fails
- Using a Completion Notice
- Receiving an Email
- Receiving an Email on a Computer
- Inbound Routing
- Using the Relay Feature
- Relayed Transmission from Internet Fax
- Relayed Transmission from PC
- Result of Relayed Transmission
- Useful Terms to Remember
- Handling Communication Reservation Files
- Program Destinations/Program Keys
- Reading Reports/Lists
- Solving Problems
- Appendix
157
Chapter 5 Internet Fax
Requesting a Relayed Transmission from a Computer
Requesting a Relayed transmission, fill the field in your mailer that corresponds to the destination (To)
in the following manner:
Sample entry:
sg-rly#8133111234@singapore.panasonic.co.sg
z When Relayed transmission completes, a communication journal is emailed to the initial sending station, and a
Fax Relay log is emailed to the administrator computer that is pre-programmed in “37 Manager’s Email Addr”
of the relay station.
Entry example Explanation
sg-rly Enter the Relay XMT Password. (It must match the Relay XMT Password pre-
programmed in the relay station.)
#8133111234 Enter the telephone number of the fax station.
In addition to the telephone number, Address Book information may be entered between
# and @.
If a pause is required for dialling an outside line from an extension by using a PBX
(exchange) or similar equipment, enter a hyphen (-) in place of the fax number.
After @ The host and domain names registered with the DNS server.